Creating Image Lists For Recording To Dvd - Toshiba Gigashot GSC-R60 Owner's Manual

Creating Image Lists for Recording to DVD

This function allows you to pre-select some of the images saved on the hard disk drive
for recording onto a DVD.
Using a PC and the bundled application software, you can quickly and easily burn a DVD
with the created list of images.
See "Using a DVD Creation List to Create DVDs"
You can also use Auto play to check created image lists.
See "Setting up and Running Auto Play"
ATTENTION
• Only images saved on the hard disk drive can be specified in a DVD creation list.
1
From the play menu, use the jog dial to select [DVD
CREATION LIST] and press the OK button.
PLAY MENU
VIDEO EDITING
DVD CREATION LIST
LCD BRIGHTNESS
EXIT
2
Use the jog dial to select [YES] or [NO] and press the OK
button.
DVD CREATION LIST
LOAD THE EXISTING DATA?
YES
3
Use the jog dial to select [DISC CAPACITY] and press the
OK button.
DVD CREATION LIST
CONNECTION DEVICES
DISC CAPACITY
OK
4
Use the jog dial to select the DVD capacity and press the
OK button.
5
Use the jog dial to select [OK] and press the OK button.
If the SD card is selected as the playback drive, the
PictBridge
[ONLY IMAGES ON HARD DISK DRIVE ARE DVD
CREATION LIST TARGET IMAGES.] message is
displayed.
Use the jog dial to select [TO HDD] and press the OK
SETUP
button.
When [YES] is selected, the existing data is loaded.
Selecting [NO] clears the existing data and replaces it
with the new data.
If there is no existing data, this screen is not displayed.
NO
The 3 available disc capacities are 1.4GB, 4.7GB and
8.5GB.
PC
4.7
GB
CANCEL
p.164.
p.110.