HPRT HM-A200U Quick Start Manual

Quick Start Guide
HM-A200U
Manufacturer: Xiamen Hanin Co.,Ltd.
Address: No.96, Rongyuan Road, Tong'an District, Xiamen, Fujian,
China 361100
E-mail: support@hprt.com
Web:www.hprt.com
Loading Paper
1. Press the left and right open button with your thumb
and middle finger to open the printer Paper Container cover .
2. Install the roll as shown below, pull part of the roll out
and lean to the left on the tearing knife. Close the Paper
Container lid, making sure both sides are closed .
Print side( thermosensitive layer )
热敏面
3. Use the tear bar to tear the extra paper .
3
Packing List
USB Cable
Printer
Note:The items in the package are actually based
！
on the order .
1
4. Pull the handle along the direction indicated by the
arrow of the Paper Container width adjustment plate,You
can unlock or lock the Paper Container width adjustment
panel .
Press the handle in this direction ， In this direction , the paper
Lock the paper containe width bin width adjusting board
adjustment panel . is unlocked by pulling the
handle to realize lateral
Paper container
width adjusting plate
The up arrow indicates
that when moving, the
middle pull-up will be smooth.
4
Appearance and Components
Front View
Power Button
Quick Start Guide
Side view
Rear View
Menu Settings
1. Press and hold the [
2 seconds, and printer is turned on.
Receipt
A200U-XXXX
2. Press and hold both [
the main menu is displayed on the screen,
followed by:
movement .
Density： dark/ light/ medium
Paper： label/receipt
Self-test page printing
Label positioning
Bluetooth： Shut down/Open
Language： Simplifled /ENG
Dormancy： Set the range none-90 minutes， It can be set up and saved
Shutdown： Set the range none-360 minutes， It can be set up and saved
Exit menu
3. Press the power button， switch menu options.
4. Press the feed button， change the type of sub option;
after changing the sub option， do not operate back to the
main screen, that is, confirm the current settings.
Paper Roll Window
Tear Bar
LCD
Right Cover
Indicator
Opening Button
Feed Button
USB Interface
电池盖
Battery
2
] button for approx.
Power
Power Button
Feed Button
] button and [
Power Feed
as normal.
as normal.
5
] button,