Related Manuals for HPRT D35
Summary of Contents for HPRT D35
- Page 1 User Manual Manufacturer: Xiamen Hanin Electronic Technology Co.,Ltd. Address: No.96, Rongyuan Road, Tong'an District, Xiamen, China 361100 E-mail: support@hprt.com Web: www.hprt.com Rev：1.0...
- Page 2 C h a n g e R e c o r d DATE DESCRIPTION EDITED CHECKED 2021.11...
-
Page 3: Table Of Contents
Contents Important Safety Instructions......................1 Chapter 1 Introduction........................4 1.1 Packing List......................... 4 1.2 Appearance and Components................... 5 1.3 Dimension.......................... 6 Chapter 2 Specifications......................... 7 Chapter 3 Installation & Usage.......................8 3.1 Paper Roll Loading......................8 3.2 Power Connection......................10 3.3 Interface Connection......................11 3.3.1 Interface Cable Connection................... 11 3.4 Operation Panel....................... - Page 4 6.2.3 Parameter Setting....................22 Chapter 7 Windows Driver Instruction..................23 7.1 Introduction........................23 7.2 Installation Preparation....................23 7.3 Installation........................24 7.4 Usage..........................28 7.4.1Printing Preferences....................28 7.4.2 Printer Properties....................40 7.5 Removing..........................44...
- Page 5 D35 User Manual Statement This manual content may be changed without permission and our company reserve the rights to make changes in technology, spare parts, hardware and software of the products. Please contract our company, if the user needs further information about the products. Without any written permission from our company, any section of this manual is prohibited to be copied or transferred in any form.
-
Page 6: Important Safety Instructions
D35 User Manual Important Safety Instructions Before using the printer, please read carefully the following safety consideration in case of bodily injury or equipment damage. 1.Safety warning It must be observed to avoid injury to human body and damage to Warning——... - Page 7 D35 User Manual Note: Violating following instructions may cause slight damage of the appliance. 1) If you observe a strange smoke, odour or noise from the printer, unplug it before taking following measures. • Switch off the printer and unplug the set from the mains.
-
Page 8: Other Precautions
D35 User Manual 3.Other Precautions This manual has been prepared with utmost care and attention to detail but may contain certain errors and/or omissions. Our company is not legally liable for any damages resulting from the use of the information in this manual. Our company and its affiliates are not legally... -
Page 9: Chapter 1 Introduction
D35 User Manual Chapter 1 Introduction 1.1 Packing List Note ： 1.Unpack the printer and keep the packing materials in case you need to ship the printer in the future. 2.Any damages exist, please contact the local dealer. Printer USB Cable... -
Page 10: Appearance And Components
D35 User Manual 1.2 Appearance and Components Front View ■ Rear View ■ Inside View ■ Note ： The views above are for your reference. Ports vary by your choice. Rev：1.0... -
Page 11: Dimension
D35 User Manual 1.3 Dimension Rev：1.0... -
Page 12: Chapter 2 Specifications
D35 User Manual Chapter 2 Specifications Items Parameter Printing Direct thermal Resolution 203dot/inch (8dot/mm) Printing Speed 4 levels,Max 180 mm/s Printing Printing Width 80mm Printing Length 25mm-300mm 32-Bit RISC CPU ≧2MB Memory Flash ≧2MB Out-of-paper detection, gap detection, black mark detection,... -
Page 13: Chapter 3 Installation & Usage
D35 User Manual Chapter 3 Installation & Usage 3.1 Paper Roll Loading 1.Facing the front of the printer, move the top cover opening button forward with both hands at the same time, and lift the top cover upward. 2.Hold the paper roll shaft,and take it out upward. - Page 14 D35 User Manual 4.Load the paper roll group into the printer from top to bottom. Note ： Close the guide clip to the extent to which the label paper is fixed. Make sure the label paper is fixed, otherwise it will cause the handwriting offset when printing.
-
Page 15: Power Connection
D35 User Manual 3.2 Power Connection 1.Make sure the printer’s power switch is in the “off” position. 2.Connect the power cord to printer. 3.Connect the other end of power cord to the outlet. Caution ： Please use the specified AC adapter in case of product damage or injury. -
Page 16: Interface Connection
D35 User Manual 3.3 Interface Connection 3.3.1 Interface Cable Connection 1.The printer supports the following communication interface standards: --USB B-Type Cable 2.Installation steps: Turn off the power switch. Connect the communication cable to the printer communication port to be used. -
Page 17: Operation Panel
D35 User Manual 3.4 Operation Panel 3.4.1 Button Operation Power On When power off, turn on the power switch at the back of printer, then the indicator will light Power Off When power on, turn off the power switch at the back of printer, then the indicator will light off. -
Page 18: Feed Button
D35 User Manual 3.4.3 Feed Button When the printer is turned on: 1） Short press Feed button (about 0.5 seconds), release Feed button, then the printer sends out a blank label； 2） Press Feed button (about 1.5 seconds) until the blue or orange light flashes once, release the ；... -
Page 19: Label Learning
D35 User Manual 3.4.4 Label learning In the following cases, users can learn label location so that printers can better locate labels: ● The printer is installed and used for the first time; ● The printer is used for the first time after the sensor is cleaned;... -
Page 20: Printer Test
D35 User Manual 3.4.5 Printer test When you initially install the printer or have any problems with the printer, you can execute the self-test program and confirm the following status. Firmware version, printer parameter setting status, print quality and external equipment related setting information, after self-check to confirm that there is no problem with the printer, please check other devices or software. -
Page 21: Chapter 4 Usb Interface
D35 User Manual Chapter 4 USB Interface SIGNAL NAME VBUS Rev：1.0... -
Page 22: Chapter 5 Printer Cleaning
D35 User Manual Chapter 5 Printer Cleaning Dust, foreign matter, viscous substances, or other contaminants adhering to the print head or printer may reduce print quality.When dirty, clean the print head as follows. Caution: 1）Make sure to turn off the printer prior to cleaning. -
Page 23: Chapter 6 Label Printer Utility Instructions
D35 User Manual Chapter 6 Label Printer Utility Instructions 6.1 Installation Preparation Download HPRTUtilityLabel application program in www.hprt.com. Eg:D35HPRTUtilityForLabel_N31V1.0.0.3.Test02 6.2 Usage Note ： The screen may vary slightly by different operating systems and models.Take Windows 7 as example. 6.2.1 Add/Modify/Delete Printer （1）Install “HPRTUtilityLabel.exe”,then open it. - Page 24 D35 User Manual （2）Add/Modify/Delete Printer, Connect Test. ●Click “Add Printer”. Choose the printer and port (eg: USB), then click “OK”, showed in “Printer List”. Rev：1.0...
- Page 25 D35 User Manual ●Click “Delete Printer”. Click “OK” to delete the printer and The deleted printers are not displayed in ”Printer List”. ●Click “Connect Test” to test whether the connection is successful or not. If connection succeeds, it shows as follows.
-
Page 26: Print Test Text
D35 User Manual （3）Function. ●Click “Printer Information”, showing printer information. (varies by different printers) 6.2.2 Print Test Text ●Click “Print Test Text”. Type the text.Set the printing range (printable width and height). Click “Print”, then printer starts to print the test text. -
Page 27: Parameter Setting
D35 User Manual 6.2.3 Parameter Setting ●Click “Parameter Setting”. User can set up the density, paper mode ,speed and so on. Click “Set” to save all the above settings. Click “OK” and back to the main menu. ●Click “Restore Factory Settings”. Click “OK” to restore factory settings and click “Cancel” to cancel the command. -
Page 28: Chapter 7 Windows Driver Instruction
Microsoft Windows XP Professional SP3 (32 bit) Microsoft Windows Server 2012(64 bit) Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 SP2(32 bit/64 bit) Microsoft Windows Server 2003 R2 SP2(32 bit/64 bit) 7.2 Installation Preparation Download Windows Driver application program in www.hprt.com. Rev：1.0... -
Page 29: Installation
D35 User Manual 7.3 Installation Note: Under different operating systems, the screen may be slightly different. Take Windows 7 as example. To avoid the prevention, recommend to close the security software before installation. 1.Select one interface to connect your printer to computer. - Page 30 D35 User Manual Rev：1.0...
- Page 31 D35 User Manual 6.Select “Install printer driver”, then click “Next”. Note: If you have connected the printer to computer, it will detect and install the driver automatically. (eg.: USB port) 7.Click “Finish”. Rev：1.0...
- Page 32 D35 User Manual 8.After installation, the icon will be found in “Start”→”Devices and Printers”. Note:If you have already installed the driver (No matter what kind of ports), it will generate a USB port automatically when connecting the printer to computer. Any problems exist, please use our utility tool.
-
Page 33: Usage
D35 User Manual 7.4 Usage 7.4.1Printing Preferences 1.Click “Start”→”Devices and Printers”. Right click the icon and choose “Printing preferences”. Rev：1.0... - Page 34 D35 User Manual 2.According to different needs, set up the page. Rev：1.0...
- Page 35 D35 User Manual ●Click “Paper”→”Name”, and choose the paper type. ●Click “Manager”, and set up a new stock. Rev：1.0...
- Page 36 D35 User Manual ●Set “Horizontal” or “Vertical”,edit offset effect. Rev：1.0...
- Page 37 D35 User Manual ●Choose “Orientation” or “Effects”, showed in the “Preview”. Rev：1.0...
- Page 38 D35 User Manual ●Choose “Advanced”. Set “Save Paper”: Set “Density”: Rev：1.0...
- Page 39 D35 User Manual Set “Speed”: Set “Test”: Rev：1.0...
- Page 40 D35 User Manual Set “Media Handing”: Set “Media Type”: Rev：1.0...
- Page 41 D35 User Manual 3.Set “Watermark”(BMP format file is recommended). Rev：1.0...
- Page 42 D35 User Manual 4.Click “Halftone”. Rev：1.0...
- Page 43 D35 User Manual ●Set “Halftone”: Rev：1.0...
- Page 44 D35 User Manual ●Set “Brightness”: Rev：1.0...
-
Page 45: Printer Properties
D35 User Manual 7.4.2 Printer Properties 1.Click “Start”→”Devices and Printers”. Right click the icon and choose “Printer properties”. Rev：1.0... - Page 46 D35 User Manual 2.Click “General”→“Print Test Page”, and printer will print labels with current settings. Rev：1.0...
- Page 47 D35 User Manual 3.Click “Ports”, then choose the port needed. Rev：1.0...
- Page 48 D35 User Manual 4.Click “Advanced” to set the time the printer can be used. Rev：1.0...
-
Page 49: Removing
D35 User Manual 7.5 Removing 1.Double click Windows Driver,then click “OK”. 2.Select “Uninstall printer driver”, then click “Next”. Rev：1.0... - Page 50 D35 User Manual 3.Choose “HPRT D35”，then click “Next”. 4.Click “Yes”. 5.Click “OK”. The driver has been removed successfully. Rev：1.0...
Need help?
Do you have a question about the D35 and is the answer not in the manual?
Questions and answers