PolyVision Eno Board Manual

Hide thumbs Also See for Eno Board:

Download this manual

Your Polyvision Eno Board has 3 primary functions:

1. Whiteboard Mode: using a dry erase marker as a regular

whiteboard.

2. Mouse Mode: The screen is an interactive surface using live

computer and webpages with your pen as your mouse.

3. Pen Mode: using digital ink as an interactive writing surface over

slides and webpages.

The Driver is the Steelcase Software that is needed to run your board.

 To begin using your board remove the cap from your pen. You

will know if the driver is running by the icon shown in the bottom

right hand corner of the screen. Click on the double arrows to

locate this icon.

You will know if your driver is running if you see one of the following

icons:

 Red means the driver is running but the pen cap is capped.

 Green means the driver is running and the pen is uncapped and

ready to go.

Polyvision Eno Board Basics

Need help?

Do you have a question about the Eno Board and is the answer not in the manual?

Page 1 Polyvision Eno Board Basics Your Polyvision Eno Board has 3 primary functions: 1. Whiteboard Mode: using a dry erase marker as a regular whiteboard. 2. Mouse Mode: The screen is an interactive surface using live computer and webpages with your pen as your mouse.
Page 2 Make sure to wait 10 seconds.  Check to see if you need new batteries. o Only LITHIUM batteries should be used for the Polyvision Pens.  Make sure you are NOT holding the pen at a 90 degree angle on the board and you are depressing the tip properly.
Page 3 Magnetic Strip Functions Pen/Cursor Toggle between pen and cursor on computer screen Previous : Pen Mode-Blank Canvas; Cursor Mode-previous slide or webpage. Next: Pen Mode: return to computer screen; Cursor Mode-next slide or webpage. Floating Keyboard. Pen Style (pen, highlighter, erasers) Ink Colors Pen Widths Solid Line...