Table of Contents
Advertisement
PS/2 Mouse
Set this option 'Enabled?to allow BIOS support for a PS/2 - type mouse.
Enabled
'Enabled' forces the PS/2 mouse port to be enabled regardless if a
mouse is present. (Default setting)
Disabled
Disable this function.
USB Controller
This item allows users to enable or disable the USB device by setting item to the desired
value.
Enabled
Enable USB controller. (Default setting)
Disabled
Disable this function.
USB 2.0 Controller
This item allows users to enable or disable the USB 2.0 device by setting item to the desired
value.
Enabled
Enable USB 2.0 controller. (Default setting)
Disabled
Disable this function.
Legacy USB Support
This option allows user to function support for legacy USB.
Enabled
Enables support for legacy USB (Default setting)
Disabled
Disable this function.
Route Port 80h cycles to
Set route port 80h cycles to either PCI or LPC bus.
PCI
Set Route Port 80h I/O cycles to the PCI bus.
LPC
Set Route Port 80h I/O cycles to the LPC bus. (Default setting)
Serial ATA
Enabled
Enables on-board serial ATA function. (Default setting)
Disabled
Disables on-board serial ATA function.
Native Mode Operation
This option allows user to set the native mode for Serial ATA function.
Auto
Auto detected. (Default setting)
Serial ATA
Set Native mode to Serial ATA.
3 7
BIOS Setup
Advertisement
Table of Contents
