Table of Contents
Advertisement
Parallel ATA
Enabled
Enable Parallel ATA. (Default setting)
Disabled
Disable the device.
Serial ATA
Enabled
Enables on-board serial ATA function. (Default setting)
Disabled
Disables on-board serial ATA function.
Native Mode Operation
This option allows user to set the native mode for Serial ATA function.
Auto
Auto detected. (Default setting)
Serial ATA
Set Native mode to Serial ATA.
SATA Controller Mode Option
Compatible Mode
Enhanced Mode
Note: Pre-Win2000 operating system do not work in Enhanced mode.
SATA AHCI Enable
Enabled
Disabled
SATA RAID Enable
Enabled
Disabled
SATA and PATA drives are auto-detected and placed in
Legacy mode. (Default setting)
SATA and PATA drives are auto-detected and placed in
Native mode.
Set this item to enable SATA AHCI function for WinXP-SP1+IAA
driver supports AHCI mode.
Disabled this function.
Enabled SATA RAID function.
Disable this function.
3 9
BIOS Setup
Advertisement
Table of Contents
