Table of Contents
Advertisement
GS-R1160-RH Rack Mount Server
Base I/O Address/IRQ
3F8/IRQ4
2F8/IRQ3
3E8/IRQ4
2E8/IRQ3
USB Controller
This item allows users to enable or disable the USB device by setting item to the desired
value.
Enabled
Disabled
Legacy USB Support
This option allows user to function support for legacy USB.
Enabled
Disabled
Route Port 80h cycles to
Set route port 80h cycles to either PCI or LPC bus.
PCI
LPC
Serial ATA
Enabled
Disabled
Native Mode Operation
This option allows user to set the native mode for Serial ATA function.
Auto
Serial ATA
SATA RAID Enable
Enabled
Disabled
SATA AHCI Enable
Enabled
Set IO address to 3F8/IRQ4.
Set IO address to 2F8/IRQ3. (Default setting)
Set IO address to 3E8/IRQ4.
Set IO address to 2E8/IRQ3.
Enable USB controller. (Default setting)
Disbale this function.
Enables support for legacy USB. (Default setting)
Disables support for legacy USB.
Set Route Port 80h I/O cycles to the PCI bus. (Default setting)
Set Route Port 80h I/O cycles to the LPC bus.
Enables on-board serial ATA function. (Default setting)
Disables on-board serial ATA function.
Auto detected. (Default setting)
Set Native mode to Serial ATA.
Set this item to enable and configure SATA RAID function.
Disabled this function. (Default setting)
Set this item to enable SATA AHCI function for WinXP-SP1+IAA
3 6
Advertisement
Table of Contents
