Features; Assembly - Craftsman 11585 - C3 19.2 Volt 7-1/4 in. Circular Saw Operator's Manual

KNOWYOURDUAL LASERCIRCULARSAW
See Figure 1,
The safe use of this product requires an understanding of
the information on the tool and in this operator's manual
as well as a knowledge of the project you are attempt-
ing. Before use of this product, familiarize yourself with all
operating features and safety rules.
BEVEL ADUSTMENT KNOB
The bevel adjustment knob allows you to set the circular
saw for bevel cuts from 0 ° to 50 °.
DEPTH ADJUSTMENT KNOB
The depth adjustment knob adjusts the depth of cut from
0 in. to 2-3/8 in.
EDGE GUIDE
The edge guide is used when making long or wide rip cuts
with the saw.
ERGONOMIC DESIGN
This tool is designed for comfort and ease of operation in
different positions and at different angles. The design of
your circular saw helps maintain proper two-hand control
during operation.
HEX KEY STORAGE
This convenient storage area stores your hex key for quick
blade changes.
LASER GUIDES
The laser guides will generate a red laser beam on the
work surface in front of and behind the saw when turned
on.
LOCK=OFF BUTTON
The lock-off button reduces the possibility of accidental
starting.
SPINDLE LOCK BUTTON
The spindle lock allows you to secure the blade when
turning the blade screw.
NOTE: Do not run circular saw with spindle lock engaged.
WIDTH OF CUT SCALE
When making straight cross cuts or rip cuts, the scale can
be used to measure up to 4-1/2 in. on the right side of the
blade, and up to one inch on the left side of the blade.
UNPACKING ,_
This product requires assembly.
[] Carefully remove the tool and any accessories from the
box. Make sure that all items listed in the packing list
are included.
[] Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
[] Do not discard the packing material until you have
carefully inspected and satisfactorily operated the tool.
[] If any parts are damaged or missing, please call
1-800-932-3188 for assistance.
PACKING LIST
Dual Laser Circular Saw
7-1/4 in. Blade
Edge Guide
Hex Key (5 mm)
Operator's Manual
A
A
WARNING: If any parts are damaged or missing
do not operate this tool until the parts are replaced.
Failure to heed this warning could result in serious
personal injury.
WARNING: Do not attempt to modify this tool
or create accessories not recommended for use
with this tool. Any such alteration or modification is
misuse and could result in a hazardous condition
leading to possible serious personal injury.
WARNING: To prevent accidental starting that
could cause serious personal injury, always remove
the battery pack from the tool when assembling
parts.
10