Features; Assembly - Craftsman 315.CRS1000 Operator's Manual

PRODUCT SPECIFICATIONS
Motor .................................................................. 19.2 V DC
Switch ..........................................................Variable Speed
KNOW YOUR RECIPROCATING SAW
See Figure 1, page i.
The safe use of this product requires an understanding of
the information on the tool and in this operator's manual
as well as a knowledge of the project you are attempt-
ing. Before use of this product, familiarize yourself with all
operating features and safety rules.
BLADE CLAMP LEVER
The saw has a blade clamp design that does not require
the use of a tool (blade wrench) when installing or
removing the blade.
C3 ENERGY INDICATOR WINDOW
The C3 energy indicator window located on the side of the
handle, just above the base, will light when you install the
battery pack listed in the note below.
UNPACKING
This product has been shipped completely assembled.
 Carefully remove the tool and any accessories from the
box. Make sure that all items listed in the packing list
are included.
WARNING:
Do not use this product if it is not
completely assembled or if any parts appear to be
missing or damaged. Use of a product that is not
properly and completely assembled could result in
serious personal injury.
 Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
 Do not discard the packing material until you have
carefully inspected and satisfactorily operated the tool.
 If any parts are damaged or missing, please call
1-800-932-3188 for assistance.

FEATURES

No Load Speed .................................0-3,100 s/min. (SPM)
Stroke Length ............................................................7/8 in.
NOTE: This feature only works with Craftsman 19.2V
lithium-ion battery pack 113710 or PP2000. Battery pack
must have charge. Feature will not light with Craftsman
19.2V nickel-cadmium battery packs.
HEX KEY STORAGE
A hex hey storage slot is conveniently located on the
bottom portion of the saw handle. Insert the provided hex
key into the storage slot when not in use.
LOCK-OFF BUTTON
The saw is equipped with a "lock-off" button which
reduces the possibility of accidental starting. The lock-off
button is located on the handle above the switch trigger.
VARIABLE SPEED
The saw has a variable speed switch that delivers higher
speed with increased trigger pressure.

ASSEMBLY

PACKING LIST
Reciprocating Saw
Blades (2)
Hex Key
Operator's Manual
WARNING:
not operate this tool until the parts are replaced. Use
of this product with damaged or missing parts could
result in serious personal injury.
WARNING:
or create accessories not recommended for use
with this tool. Any such alteration or modification is
misuse and could result in a hazardous condition
leading to possible serious personal injury.
WARNING:
could cause serious personal injury, always remove
the battery pack from the tool when assembling
parts.
7 – English
If any parts are damaged or missing do
Do not attempt to modify this tool
To prevent accidental starting that