Page 2
Thanks for purchasing ezcap370 CamLinkU3 video capture card. Please read this manual before use and keep it in a safe place for future reference. You can use this device: Capture and stream HDMI video up to 1080p60resolution on your computer.
Page 3
After download and installation, double click OBS Studio.Click icon +under Sources window, and select Video Capture Device. Click OKin thenew pop-up window. Please click Device and select ezcap CamLinkU3. Video Setting You should get the video in window. If not, and you see Check Resolutions Settings on the window, you need to set the video resolution.
Page 4
Audio Setting Please clickAudio Output Mode to select Output desktop audio (WaveOut), and tick Use custom audio device, and click Audio Device and select HDMI (ezcap CamLinkU3), you will hear the sound now. Set the video latency for make the audio and video synchronized. Right click Video...
Page 5
can adjust it until the audio and video are synchronized. Recording Click Settings of OBS panel, and clickVideo. Click Base (canvas) Resolution to select the appropriate resolution, and click Output (Scaled) Resolution to select the output resolution. Click Common FPS Values to select the FPS values. After setting, click Apply and Ok, then simply click Start Recording to start recording video, and click Stop Recording to stop recording.
Page 6
Specifications Interface: USB 3.2 (Gen 1) Type-A (plug and play, UVC) Max Video Input: HDMI ™ 1.4 4K30 specification enabled. Audio Input: HDMI Max Record Resolution: YUY2/MJPG –3840 x 2160p18, 2560 x 1440p30,1920 x 1080p60, 1360 x 768p60, 1280 x 1024p60, 1280 x 960p60, 1280 x 720p60, 1024 x 768p60, 800 x 600p60, 720 x 576p60, 720 x 480p60, 640 x 480p60 Dimensions (W x D x H): 89 x 40 x 12 mm (cable is not included) Operating System...
Page 7
The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
Need help?
Do you have a question about the CAMLINKU3 and is the answer not in the manual?
Questions and answers