Download Print this page
Warn 69076 Installation Instructions
Warn 69076 Installation Instructions

Warn 69076 Installation Instructions

1.5 ci atv winch mounting kit

Advertisement

Quick Links

As you read these instructions, you will see NOTES, CAUTIONS, and WARNINGS. Each message has a
specific purpose. NOTES are additional information to help you complete a procedure. CAUTIONS are
safety messages that indicate a potentially hazardous situation which, if not avoided, may result in minor or
moderate injury. A CAUTION may also be used to alert against unsafe practice or possible equipment
damage. WARNINGS are safety messages that indicate a potentially hazardous situation, which, if not
avoided could result in serious injury. CAUTIONS and WARNINGS identify the hazard, indicate how to avoid
the hazard, and advise of the probable consequence of not avoiding the hazard. PLEASE WORK SAFELY!
Before You Begin
This kit is compatible with WARN's 1.5ci ATV winch. Winch sold separately. Please read WARN's Winching
Technique guide provided with the winch prior to use of this product.
Table of Contents
I.
Parts List .................................................... 2
II.
Tools Required ........................................... 2
III.
Predator Installation .................................... 3
WARN® INDUSTRIES
INSTALLATION INSTRUCTIONS
1.5 CI ATV Winch Mounting Kit
Part Number: 69076
Applications: Polaris Predator
NOTICE
Winch and equipment Damage
This mount is designed for a 1500 lb. winch.
Using a higher capacity winch may cause severe
damage to the mount or ATV.
Read installation and operating instructions
thoroughly.
PAGE 1
69215 Rev A0

Advertisement

loading
Need help?

Need help?

Do you have a question about the 69076 and is the answer not in the manual?

Questions and answers

Summary of Contents for Warn 69076

  • Page 1 PLEASE WORK SAFELY! Before You Begin This kit is compatible with WARN’s 1.5ci ATV winch. Winch sold separately. Please read WARN’s Winching Technique guide provided with the winch prior to use of this product.
  • Page 2 • Sockets: 12mm, 13mm, 1/2”, 7/16” 3870 5/16-18 x 3/4 Hex Cpsc • Wrenches: 12 mm, 13mm, 1/2” 37205 U-Bolt 1/4-20 x 1 x 1 3/4 1320 1/4 Flat Washer 6725 1/4-20 Nylock Nut WARN® INDUSTRIES PAGE 2 69215 Rev A0...
  • Page 3 Stripped, fractured, or bent bolts or nuts need to be replaced WARNING Figure 3 Failure to perform regular inspections and maintenance on the winch, winch mount, and related hardware may result in vehicle WARN® INDUSTRIES PAGE 3 69215 Rev A0...