Please keep this manual and other product literature found in this kit for future reference. Should you be missing any of the necessary instructions, please visit www.warn.com or contact us at the number below. Finger/Fairlead Crushing...
• Bracket Kit PN89770 is available for purchase if you later decide to use a bracket for mounting. Contact a Warn Industries customer service representative at 1.800.543.9276. As you read these instructions, you will see WARNINGS, CAUTIONS, NOTICES and NOTES. Each message has a specifi c Parts List purpose.
5. Remove the four (4) flat head torx drive screws located on the underside of the tie plate. NOTE: Rope may need to be spooled out to complete this step. Remove (4 total) Figure 3 WARN INDUSTRIES WARN INDUSTRIES 89969A0 89969A0...
The cover should like to purchase the bracket shown please remain wired to the contactor during this contact: WARN Industries at 1-800-543-9276 or assembly process. Simply move the cover to visit www.warn.com. one side or out of the way while working on the 2.
Page 7
Figure 12 7. Make sure to plug in the winch remote and ensure that drum is turning in the proper direction when spooling in/out before using in the field. 8. Installation complete. WARN INDUSTRIES WARN INDUSTRIES 89969A0 89969A0...