Warn 60272 Instalation Instruction

Your safety, and the safety of others, is very important. To help you make informed decisions about safety, we have provided installation
and operating instructions and other information on labels and in this guide. This information alerts you to potential hazards that could
hurt you or others. It is not possible to warn you about all potential hazards associated with this product, you must use your own good
judgment.
CARELESS INSTALLATION AND OPERATION CAN RESULT IN SERIOUS INJURY OR EQUIPMENT DAMAGE.
READ AND UNDERSTAND ALL SAFETY PRECAUTIONS AND OPERATING INSTRUCTIONS BEFORE INSTALLING
AND OPERATING THIS PRODUCT.
This guide identifies potential hazards and has important safety messages that help you and others avoid personal injury or death.
WARNING and CAUTION are signal words that identify the level of hazard. These signal words mean:
WARNING signals a hazard that could cause serious injury or death, if you do not follow recommendations.
CAUTION signals a hazard that may cause minor to moderate injury, if you do not follow recommendations.
This guide uses NOTICE to call attention to important mechanical information, and Note: to emphasize general information worthy of
special attention.
SEVERE INJURY OR DEATH MAY RESULT IF YOU IGNORE ANY
OF THE FOLLOWING.
• Read the Winch Operator's Manual, ATV Operator's Manual, and all
warning labels before operating the winch and ATV.
• Stay clear of moving parts and cable. Keep others away when
operating the winch.
• Inspect the winch mechanism, fasteners, and cable, before operating.
Replace all worn or damaged parts before operating.
• Make sure the winch is deactivated when leaving the ATV unattended.
PART NO.
65864
28325
13455
1402

INSTRUCTIONS:

INSTALATION INSTRUCTION ATV
Mount Kit: PN 60272
Application:
WARNING

PARTS LIST:

QUANTITY
1
4
4
4
Page 1
WINCH MOUNT
YAMAHA BIG BEAR 4x4, 00+
DESCRIPTION
Mounting plate
8MM x 1.25 x 16MM hex head cap screw
8MM x 1.25, hex nuts
5/16 lock washer
65863A0