Selecting And Deselecting Functions - Texas Instruments TI-84 PLUS - Graphing Calculator Manual Book

3. Press ƒ a to display the
and then press Í.
!
"expression" Yn
When the instruction is executed, the TI-84 Plus stores the expression to the designated variable
, selects the function, and displays the message
Yn
Evaluating Y= Functions in Expressions
You can calculate the value of a Y= function
Yn(value)
Yn({value1,value2,value3, . . .,value n})

Selecting and Deselecting Functions

Selecting and Deselecting a Function
You can select and deselect (turn on and turn off) a function in the Y= editor. A function is selected
when the sign is highlighted. The TI-84 Plus graphs only the selected functions. You can select
=
any or all functions Y1 through Y9, and Y0.
To select or deselect a function in the Y= editor, follow these steps.
1. Press o to display the Y= editor.
2. Move the cursor to the function you want to select or deselect.
3. Press | to place the cursor on the function's
4. Press Í to change the selection status.
When you enter or edit a function, it is selected automatically. When you clear a function, it is
deselected.
shortcut menu, move the cursor to the function name,
YVAR
.
Done
at a specified
Yn
sign.
=
of X. A list of
value values
Chapter 3: Function Graphing
returns a list.
69