Using The Clock; Interchangeable Faceplates - Texas Instruments TI-84 PLUS - Graphing Calculator Manual Book

Removing a Faceplate
1. Lift the tab at the bottom edge of
the faceplate away from the TI-84
Plus Silver Edition case.
2. Carefully lift the faceplate away
from the unit until it releases. Be
careful not to damage the
faceplate or the keyboard.
Installing New Faceplates
1. Align the top of the faceplate in the
corresponding grooves of the TI-84
Plus Silver Edition case.
2. Gently click the faceplate into
place. Do not force.
3. Make sure you gently press each
of the grooves to ensure the
faceplate is installed properly. See
the diagram for proper groove
placement.

Using the Clock

Use the clock to set the time and date, select the clock display format, and turn the clock on and
off. The clock is turned on by default and is accessed from the mode screen.
Displaying the Clock Settings
1. Press z.
2. Press the † to move the cursor to
3. Press Í.
.
SET CLOCK
Chapter 1: Operating the TI-84 Plus Silver Edition 9