Error Conditions - Texas Instruments TI-84 PLUS - Graphing Calculator Manual Book

5. Press Í on the sending unit. A
unit.
6. Press Í on the receiving unit to continue the backup.
— or —
Press on the receiving unit to cancel the backup and return to the
2:Quit
If a transmission error is returned during a backup, the receiving unit is reset.
Note:
Memory Backup Complete
When the backup is complete, both the sending graphing calculator and receiving graphing
calculator display a confirmation screen.

Error Conditions

A transmission error occurs after one or two seconds if:
• A cable is not attached to the sending unit.
• A cable is not attached to the receiving unit.
If the cable is attached, push it in firmly and try again.
Note:
• The receiving unit is not set to receive transmission.
• You attempt a backup between a TI-73, TI-82, TI-83, TI-83 Plus, or TI-83 Plus Silver Edition.
• You attempt a data transfer from a TI-84 Plus to a TI-83 Plus, TI-83 Plus Silver Edition, TI-83,
TI-82, or TI-73 with variables or features not recognized by the TI-83 Plus, TI-83 Plus Silver
Edition, TI-83, TI-82, or TI-73.
New variable types and features not recognized by the TI-83, TI-83 Plus, TI-82, or TI-73
include applications, application variables, grouped variables, new variable types, or programs
with new features in them such as
,
AsmPrgm checkTmr(
,
getTmFmt getTmStr
,
startTmr summation(
• You attempt a data transfer from a TI-84 Plus to a TI-82 with data other than real lists
through or without using menu item
L6
• You attempt a data transfer from a TI-84 Plus to a TI-73 with data other than real numbers,
pics, real lists through
L1
Although a transmission error does not occur, these two conditions may prevent successful
transmission.
• You try to use
Get(
• You try to use
GetCalc(
WARNING — Backup
Archive
, , ,
ClockOff ClockOn
, ,
isClockOn randIntNoRep(
, and fractions.
timeCnv
5:Lists to TI82
or named lists with q as part of the name.
L6
with a graphing calculator instead of a CBL 2™ system or CBR™ system.
with a TI-83 instead of a TI-84 Plus or TI-84 Plus Silver Edition.
message displays on the receiving
, , ,
UnArchive SendID SendOS
, ,
dayOfWk( getDate getDtFmt
, ,
setDate( setDtFmt(
.
Chapter 19: Communication Link
menu
LINK SEND
, ,
Asm( AsmComp(
, ,
getDtStr( getTime
, , ,
setTime( setTmFmt(
L1
,
,
352