Split-screen display with both x-y plots and stat plots
Some screens are never displayed as split screens. For example, if you press z in
mode, the mode screen is displayed as a full screen. If you then press a key that displays either
half of a split screen, such as r, the split screen returns.
When you press a key or key combination in either
half of the display to which that key applies. For example, if you press r, the cursor is placed
in the half where the graph is displayed. If you press y 0, the cursor is placed in the half
where the table is displayed.
The TI-84 Plus will remain in split-screen mode until you change back to
Horiz (Horizontal) Split Screen
Horiz Mode
In
(horizontal) split-screen mode, a horizontal line splits the screen into top and bottom
Horiz
halves.
The top half displays the graph.
The bottom half displays any of these screens.
•
Home screen (four lines)
•
Y= editor (four lines)
•
Stat list editor (two rows)
•
Window editor (three settings)
•
Table editor (two rows)
Moving from Half to Half in Horiz Mode
To use the top half of the split screen:
or
mode, the cursor is placed in the
Horiz
G-T
Full
Chapter 9: Split Screen
or
Horiz
G-T
screen mode.
139