Texas Instruments TI-84 PLUS - Graphing Calculator Manual Book page 402

Error Type
DIVIDE BY 0
DOMAIN
DUPLICATE
Duplicate Name
EXPIRED
Error in Xmit
ID NOT FOUND
ILLEGAL NEST
INCREMENT
INVALID
Possible Causes and Suggested Remedies
• You attempted to divide by zero. This error is not returned during graphing.
The TI-84 Plus allows for undefined values on a graph.
• You attempted a linear regression with a vertical line.
• You specified an argument to a function or instruction outside the valid range.
This error is not returned during graphing. The TI-84 Plus allows for undefined
values on a graph. See Appendix A.
• You attempted a logarithmic or power regression with a
or power regression with a
• You attempted to compute
You attempted to create a duplicate group name.
A variable you attempted to transmit cannot be transmitted because a variable
with that name already exists in the receiving unit.
You have attempted to run an application with a limited trial period which has
expired.
• The TI-84 Plus was unable to transmit an item. Check to see that the cable is
firmly connected to both units and that the receiving unit is in receive mode.
É
• You pressed to break during transmission.
• You attempted to perform a backup from a TI.82 to a TI-84 Plus.
• You attempted to transfer data (other than
a TI.82.
• You attempted to transfer
5:Lists to TI82
using
This error occurs when the SendID command is executed but the proper
graphing calculator ID cannot be found.
• You attempted to use an invalid function in an argument to a function, such as
seq( expression
within
seq(
• The increment in
during graphing. The TI-84 Plus allows for undefined values on a graph.
For(
• The increment in a
• You attempted to reference a variable or use a function where it is not valid.
Yn
For example, cannot reference
• You attempted to reference a variable or function that was transferred from the
TI.82 and is not valid for the TI-84 Plus For example, you may have
transferred Un N 1 to the TI-84 Plus from the TI.82 and then tried to reference
it.
Seq
• In mode, you attempted to graph a phase plot without defining both
equations of the phase plot.
Seq
• In mode, you attempted to graph a recursive sequence without having
input the correct number of initial conditions.
Seq
• In mode, you attempted to reference terms other than
• You attempted to designate a graph style that is invalid within the current
graph mode.
• You attempted to use
xyLine or scatter plot.
Y
L .
G Prn( G Int( pmt2
or with
L1
through
L1 L6
through from a TI-84 Plus to a TI.82 without
LINK SEND
on the menu.
seq(
for .
is 0 or has the wrong sign. This error is not returned
loop is 0.
Y Xmin @ X
, ,
Select(
without having selected (turned on) at least one
Appendix B: Reference Information
X
L or an exponential
pmt1
< .
L6
) from a TI-84 Plus to
TblStart
, or .
(n 1) (n 2)
N or N .
395