Texas Instruments TI-84 PLUS - Graphing Calculator Manual Book page 179

Classic
Using Select( to Select Data Points from a Plot
To select data points from a scatter plot or xyLine plot, follow these steps.
1. Press y 9 ~
screen.
, press ¢, enter
2. Enter
xlistname
you want the selected data to be stored.
3. Press Í. The graph screen is displayed with
4. Press } or † (if more than one stat plot is selected) to move the cursor onto the stat plot from
which you want to select data points.
5. Press | and ~ to move the cursor to the stat plot data point that you want as the left bound.
6. Press Í. A 4 indicator on the graph screen shows the left bound.
displayed in the bottom-left corner.
to select from the
8 8:Select(
, and then press ¤ to designate list names into which
ylistname
menu.
LIST OPS Select(
in the bottom-left corner.
Left Bound?
Chapter 11: Lists
is pasted to the home
is
Right Bound?
172