Elecom V custom M-VM510 User Manual page 10

2) Start up your PC.
Please wait until your PC has started up and can be operated.
3) Connect the USB-A connector on the included charging cable to the USB-A port on your PC.
Ensure that the connector is correctly oriented to the port.
If there is strong resistance when inserting, check the shape and orientation of the connector. Forcibly inserting the
connector may damage the connector, and there is a risk of injury.
Do not touch the terminal portion of the USB connector.
4) The driver will be automatically installed, and you will then be able to use the mouse.
You can now use the mouse.
You will be able to assign functions to all the buttons and setup the DPI count by installing the settings software "EG Tool". Please
continue to "Setting up the ELECOM GAMING Tool (EG
Installing the mouse feet
This product comes with a mouse feet that attaches to the bottom of the mouse.
By changing the surface area of the mouse feet, it can be adjusted to your preferred comfort.
* Please peel off the blue protective film before attaching the mouse feet.
USB Type-C port
Tool)".
Charging cable
port