Engine Frame and
Wheel Assembly
High Pressure
Hose
1.
Place handle assembly onto frame,
depress the snap buttons, and slide
the handle assembly onto the frame
until snap buttons snap into place.
2.
Connect wand to gun.Tighten
securely.
3.
Attach high
pressure hose to
gun. Tighten se-
curely.
4.
To Assemble Accessories Panel
a.
Remove top
screws on
handle
assembly.
b.
Loosen
bottom
screws on
handle
assembly.
A04032
CARTON CONTENTS
Accessories Panel
English/
Engine
Spanish/French
Manual
Operation
Manual
Accessories Panel
Engine
Oil
ASSEMBLY INSTRUCTIONS
Remove
Loosen
Allen Wrench and
Cleaning Tool
Chemical
Bagged Parts
Multi-Adjustable Spray Wand
Spray Gun
c.
Place grooves in accessories
panel assembly onto screws
and slide panel assembly into
place.
Screws
d.
Place screws (removed earlier)
into the top holes and secure
accessories panel assembly
to handles. Do not
overtighten.
5.
Add engine oil (supplied) to
engine. Refer to Engine Owners
Manual supplied by engine
manufacturer for correct
procedure.
NOTE: There will be a slight amount of
oil in the engine from factory testing.
6- ENG
Hose
Handle