Arkon RoadVise RVXLRM8825HD Manual

RVXLRM8825HD | RoadVise® XL Holder with 18" Seat Rail Mount
RVXLWR
SP25MM17
Option 1 - Mounting the Passenger Seat Bolt
Utilize a socket wrench to loosen the bolt on the passenger
seat track. Then, insert the seat track bolt bracket. Finally,
tighten the seat track bolt securely.
WARNING
CHOKING HAZARD - Keep out of reach from children under 8 yrs. as they can choke or suffocate on parts included with this system
WARNING
Arkon® is not responsible for any damages caused to your device or yourself due to the installation or use of this mount. Do not install Arkon® products near areas that intefere with operation
of vehicles. Arkon® assumes no responsibility or liability for injury or death as a result of failure to install in a safe location. Arkon® is not responsible for any damages caused to vehicles,
product, or people due to the installation or use of this product.
SP-RM250
RMH08825MM
Includes:
1 – RoadVise® XL Holder with Tightening Ring (RVXLWR)
1 – 25mm Ball to 17mm Ball Adapter (SP25MM17)
1 – Robust™ Series 3.75 inch Shaft Arm (SP-RM250)
1 – Seat Rail Floor Pedestal with 25mm Ball (RMH08825MM)
Important: Clean the application surface and make sure it is free of dirt, dust,
and grease before installation.
Compatibility: This holder is suitable for smartphones and tablet with cases
measuring up to 5" wide.
Seat Rail Kit Hardware Specifications:
1 - Metal conduit (SPCONDUIT)
1 - Floor mounting bracket
4 - Phillips rounded heads screws (18-8 Stainless Steel, M4.2 Screw Size 25mm Long)
Option 2 - Floor Mounting
Fasten the floor bracket to the mount. (Adjust the bracket's
orientation as needed for your vehicle). Secure the
floor/console bracket in place using screws.
USA (800) 841-0884
INT'L (626) 254-9005
Monday - Friday 9 am - 5 pm PST
Mount Base
Floor Bracket
Mount Base
Floor Bracket
arkon.com
Designed in USA
©Arkon Resources, Inc.
Continued on page 2
Need assistance?
Scan to email our
Arkon® customer
service team.