Arkon RoadVise RVKN8VHB Manual

RVKN8VHB | RoadVise
RVKNAMPS SPRM8SKT
Install the AMPS Adapter Plate to the phone holder
Locate the packaging with the AMPS ball adapter plate and the
phone holder. Then, insert the four mounting screws through the
AMPS 4-hole ball adapter plate and into the phone holder. Finally,
secure the screws tightly.
WARNING
CHOKING HAZARD - Keep out of reach from children under 8 yrs. as they can choke or suffocate on parts included with this system
WARNING
Arkon ® is not responsible for any damages caused to your device or yourself due to the installation or use of this mount. Do not install Arkon
of vehicles. Arkon ® assumes no responsibility or liability for injury or death as a result of failure to install in a safe location. Arkon
product, or people due to the installation or use of this product.
® Ultra Holder with Adhesive Mount
SPRM8VHB APAMPS25MM
Includes:
1 – RoadVise® Ultra Phone Holder Kit
1 – 4-Hole AMPS to 25mm Ball Adapter
1 – OCTO™ Series Single Ball Arm with Octagon Button Socket
1 – OCTO™ Series Adhesive Base to Octagon Button Adapter
Compatibility: This holder is suitable for smartphones with cases measuring up to
5.71" wide.
Assemble the components
Turn the shaft arm counterclockwise to loosen it. Then, connect
the 25mm ball adapter to one end and the button pattern to the
other end. Lastly, tighten the shaft to ensure everything is
securely in position.
USA (800) 841-0884
INT'L (626) 254-9005
Monday - Friday 9 am - 5 pm PST
(RVKNAMPS)
(APAMPS25MM)
® products near areas that intefere with operation
® is not responsible for any damages caused to vehicles,
Need assistance?
arkon.com
Scan to email our
Designed in USA
Arkon® customer
©Arkon Resources, Inc.
rev.071224
(SPRM8SKT)
(SPRM8VHB)
Continued on page 2
service team.