Arkon RMVESAMPS Manual

RMVESAMPS | Robust AMPS Mount with VESA 75/VESA 100 Compatible Head
SP-RM200 APMAMPS25MM
1
Attach APMAMPS25MM and AP25MMVESA adapters to the mount
shaft as shown by loosening knob. Tighten to secure.
APMAMPS25MM
3
Loosen adjustment knob to adjust angle of pedestal and position
of VESA plate. Tighten to secure.
Safety Precautions
!
Do not install Arkon products over an air bag cover or within the air
bag deployment zone. Arkon Resources, Inc. assumes no responsi-
bility of liability for injury or death as a result of car crashes and / or
air bag deployment.
Arkon is not responsible for any damages caused to your vehicle, your
device, or yourself due to the installation or use of this mount.
AP25MMVESA
AP25 AP25MMVESA AP25
Adjustment Knob
Package Contents:
(1) SP-RM200 – Robust Mount Shaft
(1) APMAMPS25MM – Metal 4-Hole AMPS to 25mm Adapter
(1) AP25MMVESA – 25mm Ball to VESA 75/VESA 100
2
Attach the pedestal to the mounting surface through the
AMPS base plate. Choose the screws (not included) that will
work best on the chosen mounting surface.
4
Attach any VESA 75/VESA 100 compatible device or holder (not
included, sold separately) to the VESA plate.
The Mobile Mounting Specialists™
Consumer Hotline:
USA
(800) 841-0884
INT'L (626) 254-9005
Monday - Friday 9 am - 5 pm, PST
rev.102717
www.arkon.com
Arcadia, CA 91006 USA
Designed in USA | Made in Taiwan
© Copyright 2017 Arkon Resources, Inc.