Cisco 7910G - IP Phone VoIP User Manual page 8

Soft Key
more
Mute
NewCall
Ok
Park
PickUp
Play
Redial
Restore
Resume
Save
Search
Select
Settings
Trnsfer
Up
Operating Your Cisco Unified IP Phone
Place a Call
Use one of the following methods to place a call:
• Lift the handset and dial a number on the keypad.
• Press the NewCall soft key and dial a number on the keypad.
• Press the Redial soft key.
• Dial the number with the phone on hook. Then press the Dial soft key or lift the handset.
Use the backspace (<<) soft key to erase digits that were entered incorrectly.
Note
Answer a Call
• Lift the handset.
End a Call
Use one of the following methods to end a call:
• Hang up the handset.
• Press the EndCall soft key.
Redial a Number
To redial the most recently dialed number, perform the following steps:
1. Lift the handset.
8
Description
Scrolls through additional soft key options (for example, use the more soft key to locate
the DND soft key).
Toggles muting on and off.
Opens a new line on the speakerphone to place a call.
Confirms the selection.
Forwards calls to a location from which the call can be retrieved by anyone in the
system.
Selectively picks up calls coming into another extension.
Plays the ring sound sample.
Redials the last number dialed.
Consult your administrator on the use of this soft key.
Returns to an active call.
Saves the last change.
Initiates a search in the local directory.
Selects the highlighted option.
Provides access to phone settings such as display contrast, ring volume, and
ring type.
Transfers selected calls to an alternate number.
Increases the LCD screen contrast.