Cisco 7910G - IP Phone VoIP User Manual page 44

End a Call
Use one of the following methods to end a call:
• Hang up the handset.
• If you are using a headset, press the Headset button or the EndCall soft key.
• If you are using the speakerphone, press the Speaker button or the EndCall soft key.
Redial a Number
Use one of the following methods to redial the most recently dialed number:
• Lift the handset and press the Redial soft key.
• Press the Redial soft key to dial using the speakerphone.
Hold a Call
To place a call on hold while on the call:
• Press the Hold soft key.
To retrieve a held call:
• Press the Resume soft key.
If multiple calls are on hold, use the Navigation button to select the desired call before you press Resume.
–
If multiple calls on multiple lines are on hold, press the line button for the line that you want to pick up. The active call
–
on the other line will automatically be put on hold.
Note Because the hold feature can generate music or a beeping tone, avoid using hold when dialed into a remote conference
system. Simple three-party conferences that are created locally on your phone can safely be placed on hold without
introducing music or beeps into the conference.
Mute a Call
To mute a call:
• While on a call, press the Mute button. The Mute button lights, indicating that the other party cannot hear you.
To deactivate the mute function, do one of the following:
• Press the Mute button again.
• Lift the handset if you are using mute along with speakerphone.
Note The Mute feature does not generate music or a beeping tone.
Manage Call Waiting
If you are on a call when a second call comes in, you will hear a call-waiting tone or see a flashing indicator light on the handset
rest, depending on the configuration of your phone.
To answer the new call on the same line:
1. Use the Navigation button to select the call
2. Press the Answer soft key to answer the call. The call on the other line will automatically be put on hold.
44