3Com 1102B - NBX Business Phone VoIP Telephone Manual page 90

Business telephones with nbx complement attendant software
Table of Contents

Advertisement

90
A
A: T
PPENDIX
ELEPHONE
Table 16 Possible Problems (continued)
Possible Problem
I am unable to log in to the NBX NetSet utility.
My telephone is not forwarding my incoming
calls to my voice mailbox.
On my NBX Business Telephone, I added a
One-Touch speed dial, but the telephone does
not dial that number.
I try to pick up a call ringing on another
telephone using Directed Call Pickup, but it
fails.
My telephone keeps ringing after I pick up the
handset.
The labels that I print for my telephone or
Attendant Console do not fit the telephone or
console.
The display panel shows "Wait for NCP."
I
, M
NSTALLATION
AINTENANCE
Suggested Solutions
You must set up your voice mail before you can use the NBX NetSet
utility. Press the MSG button. The prompts guide you through the
setup. Then use your voice mail password to access the NBX NetSet
utility. See
Time"
In NBX NetSet > User Information > Call Forward, verify that
you have selected Forward to Voice Mail as your call coverage
point. For details, see
Chapter
Use only numeric characters in your Speed Dial setup. For details,
see
"Special Case: One-Touch Speed Dials"
The telephone that you are using to pick up the call may not be in
the same group as the telephone that is ringing and the ringing
telephone does not allow nonmember pickup. See
Chapter
Your telephone may have lost connection to the system
immediately after a call came in. Remove the Ethernet cord from
the jack, then re-insert it into the wall jack.
Wait a few seconds. If the telephone continues to ring,
disconnect the electrical power for your telephone, and then
plug it back in.
When you are in Adobe Acrobat Reader, select File and then Print.
In the Print dialog box, be sure that the check box for Fit to Page
or Shrink to Fit (or similar names) is not selected.
Your telephone may be disconnected from the system. Hang up
your telephone and wait a few seconds. Then pick up the handset.
If the message still appears on your telephone display panel,
contact your administrator.
,
T
AND
ROUBLESHOOTING
"Setting Up Your Password and Voice Mail for the First
in
Chapter
1.
"Setting Your Call Coverage Point"
5.
7.
in
in
Chapter
6.
"Call Pickup"
in

Advertisement

Table of Contents
loading

Table of Contents