Subscribe to Our Youtube Channel
Related Manuals for Origin Acoustics Origin Pro PSUB10X2
Summary of Contents for Origin Acoustics Origin Pro PSUB10X2
- Page 1 PROFESSIONAL SURFACE MOUNT SUBWOOFER PSUB10X2 INSTALLATION MANUAL Please visit www.originpro.com or scan the QR code using your smart device for the most up to date safety information and use instructions for this product.
-
Page 2: Table Of Contents
Table of Contents 1. Introduction 2. Product Description 3. PSUB10x2 Specifications 4. Required Tools 5. What’s Included 6. Mounting Components 7. Subwoofer Features 8. System Wire Routing Considerations 9. Subwoofer Placement Considerations 9a. Port Placement Considerations 9b. Floor Mounting Rubber Feet 9c. - Page 3 Table of Contents 14.. Subwoofer Wiring Steps 15. Tap Settings: Notes & Guidance 15a. 70V Hi-Z Example Wiring Diagram 16. Troubleshooting 17. Technical Assistance 18. Limited 5-Year Warranty 19. Return Process...
- Page 4 IMPORTANT SAFETY INSTRUCTIONS This product must only be installed by professional AV integrators and installers. If using this product as surface mount, suspended, or any elevated location, be sure to consult a qualified structural engineer for are any questions or concerns regarding the structural integrity to ensure this product is used safely.
-
Page 5: Introduction
1. Introduction Thank you for purchasing the Origin PRO Professional PSUB10x2 Subwoofer. All of Origin PRO’s speakers are designed to have excellent sound quality, longevity, a simple installation process, and built specifically for commercial applications. This instruction booklet covers the necessary information for a smooth installation, including: the tools you will need, step-by-step instructions for installation, troubleshooting tips for any errors that may occur, and all warranty information. -
Page 6: Product Description
2. Product Description The PSUB10X2 Subwoofer boasts dual 10” low Profile, Dual Voice Coil, Flat Honeycomb, Glass Fiber woofers housed within a compact wooden bandpass enclosure constructed with a robust internal bracing. The subwoofer offers multiple orientation and placement options for a tai- lored install. -
Page 7: Psub10X2 Specifications
3. PSUB10x2 Specifications Part: PSUB10X200 System Type: Dual 10” Bandpass Surface Mount Subwoofer Driver Components: 2 x 10” Low Profile, Dual Voice Coil, Rigid Flat Honeycomb Glass Fiber Cone Woofers Crossover: Recommended LPF = 120Hz, 24dB, Butterworth Frequency Response: 30Hz-160Hz (-10dB), 38Hz-120Hz (+/-3dB) Maximum SPL @1m (Free Space): 118 dB Pink Noise, 121 dB Continuous, 123 dB Peak System Coverage: 360 Sensitivity, 2.83v/1m: 94 dB... -
Page 8: What's Included
6. Mounting Components 5. What’s Included 1.Subwoofer Bracket 1. PSUB10x2 Subwoofer 2. 4 x M10 x 1.5mm Bolts 2. Terminal Cover with 4 x Screws 3. 4 x Washers 3. 4 x Rubber Feet 4. Quickstart Guide 7. Subwoofer Features Port Alternate port location Terminal and tap switch... -
Page 9: System Wire Routing Considerations
8. System Wire Routing Considerations Plan how you will route the wire to the desired speaker location. There are several methods for routing the wire, and you may need to combine several of them. Behind the Baseboard The wire can Through Walls When running wires be routed behind the baseboard by through a wall, be sure to avoid all... -
Page 10: Subwoofer Placement Considerations
9. Subwoofer Placement Considerations When planning the subwoofer placement, remember that positioning it near the speakers is sonically advantageous; and being close to walls, especially corners, is very helpful when maximum loudness is important. The subwoofer offers multiple orientation and placement options for a tailored install. -
Page 11: 9A. Port Placement Considerations
9a. Port Placement Considerations The port can be easily repositioned to either the long side or short side of the cabinet enclosure, to facilitate a wide range of installation contexts. IMPORTANT: If re-locating the port, do not remove or damage the pre-in- stalled gaskets that seal the port and port cover. -
Page 12: 9B. Floor Mounting Rubber Feet
9b. Floor Mounting Rubber Feet In floor-mount applications, for example, under bench seating or within cabi- netry, you may use the 4 included adhesive-backed rubber feet to prevent any sliding, marking or vibration transference. 9c.Subwoofer Bracket Features 2 x Subwoofer Attachment Holes Mounting Bracket short-side view... -
Page 13: Surface Mounting Installation Steps
2. Using high-quality, graded lag bolts or similar fasteners rated for >150 lbs (180kg) each of shear working load, secure the bracket to the installation surface. M10 or 3/8” bolts are recommended, not included. Origin Acoustics PSUB10x2 6975 S Decatur Blvd... - Page 14 Place a damping material (for example, mass-loaded vinyl, neoprene foam, rubber sheets, etc. between the bracket and installation surface, in order to prevent vibration transference. 3. Lift the subwoofer into place and use the 4 included M10 x 1.5mm bolts and lock washers to install the subwoofer securely into the bracket.
-
Page 15: Final Suspension Safety Measures
Note: These fly points can also be used to suspend the subwoofer as the main mounting style. Origin Acoustics PSUB10x2... -
Page 16: 12A. Speaker Wire Polarity: Notes & Guidance
12a. Speaker Wire Polarity: Notes & Guidance You will need a wire that has at least two conductors; one that can be identified as the positive and the other as the negative. All two conductor wires have some means of identifying which conductor is which, but at times this identification may be subtle. -
Page 17: 12B. Speaker Wire Gauge: Notes & Guidance
12b. Speaker Wire Gauge: Notes & Guidance The gauge of wire used can have an impact on the performance of your speakers. Generally, speaker wire is determined by the length of the run and wattage utilized. The longer your run is, the smaller the wire gauge must be. On commercial 70 Volt systems, 18 gauge, 2 conductor, stranded and jacketed without shield wire is commonly used. -
Page 18: 12C. Wire Gauge - 4 Ohm System Notes
12c. Wire Gauge – 4 Ohm System Notes If using the PSUB10x2 in a 4 Ohm system, the total wire resistance must be less than 10% of the speaker impedance. For example, since the speakers are nominally 4 ohms impedance, the total calculated wire resistance should be no more than 0.4 ohms. -
Page 19: 13A. 70V/100V System Notes & Guidance
13a. 70V/100V System Notes & Guidance 70/100-Volt systems are advantageous when the design calls for multiple speakers from the same amplifier and/or long-distance wire runs. NOTE: 70V is common in the U.S. while 100V is the common voltage internationally, especially in Europe. 13b. - Page 20 First, for safety purposes, it is recommended to make the calculations based on 80% of the amplifiers rated power. • For example, 80% of an amplifiers rated power will mean that a 500W amplifier would safely deliver 400W of usable power (500W x 0.8 = 400W). Now, it is simply a matter of dividing 400 by the number of speakers and the tap setting being used in the system.
-
Page 21: Subwoofer Wiring Steps
14. Subwoofer Wiring Steps 1. Run the wiring from the amplifier (and any other speakers running in parallel) through the punch out in the terminal cover, and into the Subwoofer Input Terminals. Port Alternate port location Terminal and tap switch 33.86in Be sure that the POSITIVE WIRE is being attached to the corresponding RED TERMINAL 860.00mm... - Page 22 2. To connect the amplifier wires to the Terminal Input Connectors on the Subwoofer: First, strip approximately 3/8” (10mm) of the insulation off each wire. 3/8” (10mm) 0.25 - 0.5” (6 - 12mm) Speaker Wire Then, locate the 5-way binding post and insert each wire into the opening with the correct polarity.
- Page 23 3. When using multiple speakers, you can connect the speakers in the PARALLEL connection method. 4. Select the proper tap wattage setting for each speaker or subwoofer in the system and set each transformer tap selector. ( Refer to 70V Wiring Notes & Guidance Section) 5.
-
Page 24: Tap Settings: Notes & Guidance
15. Tap Settings: Notes & Guidance This Professional PSUB10x2 features 3 different tap settings off the transformer, adjusted by a rotary switch on the side face of the speaker. The higher the wattage selected, the more output will be generated by the speaker. The following table lists the power tap settings for the subwoofer: Model Position... -
Page 25: 15A. 70V Hi-Z Example Wiring Diagram
15a. 70V Hi-Z Example Wiring Diagram 3 X PSUB10X2 HI-Z Wiring with PROA1200.1 Amp (PSUB10X2 is set to 300W / 70W Tap Setting) (Amp set to HI-Z 70V Output Mode) Amp Output mode set to Hi-Z -70V [Bridge mode] • OUTPUT CH1/CH2 for Subwoofers Amp Output mode set to Hi-Z -70V [Bridge mode] •... -
Page 26: Troubleshooting
16. Troubleshooting If you have a problem, try isolating it first. For example, if you’re playing a DVD and there is no sound, try replacing the DVD with another audio source to see if you get sound. If it does work, then the problem is with the television, DVD player, or the cables connecting them. -
Page 27: Technical Assistance
17. Technical Assistance If you have any questions or concerns about installing or using this product, you can reach us through one of the following methods: Phone: (844) 674-4461 Hours of operation: 8:00am - 5:00pm (Pacific Time), Mon - Fri If you are having technical trouble, please have ready your model number and be prepared to briefly explain what steps you took to resolve the problem, to be best helped over the phone. - Page 28 Requirements & Warranty Coverage This warranty may not be valid if the product was purchased through an unauthorized dealer. This warranty only applies to the individual that made the original purchase, and it cannot be applied to other purchases. The purchaser must be prepared to provide proof of purchase (receipt).
-
Page 29: Return Process
19. Return Process Before making any return attempts, it is required that you first contact Origin PRO. Return product to Origin PRO or your dealer, either in person or by mail. It’s preferable if the product is returned in the original packaging. If this is not possible, the customer is responsible for insuring the shipment for the full value of the product. - Page 30 03-12-25 • 6975 S Decatur Blvd, Las Vegas, NV 89118 • www.originpro.com • 844-674-4461 ©2025 Origin PRO. All copyrighted, trademarked and patented elements mentioned herein are the sole property of Origin PRO.
Need help?
Do you have a question about the Origin Pro PSUB10X2 and is the answer not in the manual?
Questions and answers