Download Print this page

CODELOCKS EasyCode CL160 Change Instructions

Advertisement

Quick Links

16/02/2022, 14:01
CL160 - Code Change Instructions
Codelocks Support Portal
CL160 - Code Change Instructions
Push Button Lock
EasyCode CL160 locks can be used at home on doors, garages and garden sheds, and at work
in offices, workshops and storerooms requiring restricted access.  Available in Silver Grey.
 
Many Codes to Choose From
The code chamber consists of 10 buttons from which the code is selected. The 'C' button is
used to re-set the chamber after an incorrect entry, and which must always be used as the
first digit of a code. The 'A' button is used to change the code; see code change sequences.
Buttons may only be used ONCE in a code. For example, 1212 is not possible.
A code, or combination, can be entered in any order or sequence; e.g. 1234 can be 4321 or
1342 or whatever sequence is most convenient to remember. With 10 buttons, over 1000
different codes are available, any of which can be entered in any sequence.
The total is arrived at as follows:
1/5

Advertisement

loading
Need help?

Need help?

Do you have a question about the EasyCode CL160 and is the answer not in the manual?

Questions and answers

Summary of Contents for CODELOCKS EasyCode CL160

  • Page 1 Codelocks Support Portal CL160 - Code Change Instructions Push Button Lock EasyCode CL160 locks can be used at home on doors, garages and garden sheds, and at work in offices, workshops and storerooms requiring restricted access.  Available in Silver Grey.  ...
  • Page 2 16/02/2022, 14:01 CL160 - Code Change Instructions   Locks come complete with random code selected. The lock can be placed into Easy Code Function or Quick Code Function. Easy Code requires the lock to be removed from the door. Quick Code is an optional function that allows the code to be changed while the lock is fitted to the door.
  • Page 3 16/02/2022, 14:01 CL160 - Code Change Instructions   6. Select and enter your new code rotating each digit clockwise using the code change tool provided (FIG 5).  7. Press ‘C’ clear button followed by your new code. Rotate the lever fully (FIG 6) and the ‘A’ button will revert to normal position.
  • Page 4 Guarantee If any Codelocks mechanical lock should develop a fault, at any time due to manufacturing, just call the Codelocks helpline and arrange for it to be repaired free of charge.
  • Page 5 Make sure the deadlocking plunger cannot enter the strike aperture alongside the latchbolt when the door is closed.   CC-CL160ML-v1:0218    © 2019 Codelocks Ltd.  All rights reserved. https:/ /desk.zoho.eu/portal/codelocks/en/kb/articles/cl160-code-change-instructions...