Table of Contents
Advertisement
92
Seats and Stowage
– In the same way, fix the cross rod to the other side of the vehicle,
A
mount
.
C
– Fold the storage compartment cover downwards.
Folding
– Fold down the storage compartment cover behind the rear seats
⇒ fig.
104.
– Pull the cross rod back slightly, first on the one side then on the other
side and take the cross rod out of the mount
– Hold the cross rod in such a way that the net partition can roll up
slowly and without damage into housing
– Fold the storage compartment cover downwards.
If you wish to use the entire luggage compartment, you can remove the luggage
⇒ page 89, fig.
compartment cover
WARNING
First check for yourself that the cross road is inserted into the mounts
in the front position!
Pay attention that the rear seat backrest is correctly interlocked. It is only
then that the three-point seat belt for the middle seat can reliably fulfil its
function.
A
⇒ fig.
105.
C
A
.
B
99.
Use the net partition behind the front seats
Pulling out
– Fold the rear seats forwards ⇒ page 81
– Pull the net partiton net at the plate
⇒ fig.
106.
– Insert the cross rod into the mount
the cross rod forward.
A
C
– In the same way, fix the cross rod to the other side of the vehicle,
A
mount
.
C
Folding
– Pull the cross rod back slightly, first on the one side then on the other
side and take the cross rod out of the mount
– Hold the cross rod in such a way that the net partition can roll up
slowly and without damage into housing
– Fold the rear seats back into its original position.
Fig. 106 Unrolling net parti-
tion
A
A
out of the housing
A
B
A
first on the one side and push
C
A
⇒ fig.
106.
C
A
.
B
Advertisement
Table of Contents
