Meaning of the red symbols:
Engine oil pressure too low
Three successive warning signals will sound if a red symbol appears.
Yellow symbols
Check the relevant function as soon as possible.
The meaning of the yellow symbols:
Check engine oil level,
engine oil sensor faulty
Brake pad worn
One warning signal will sound if a yellow symbol appears.
If several operational faults of priority 2 exist, the symbols appear one after the
other and are each illuminated for about 5 seconds.
Using the system
Safety
⇒ page 35
Fig. 33 Information display:
Brake pad worn
⇒ page 40
⇒ page 39
Driving Tips
General Maintenance
Instruments and Indicator/Warning Lights
Set-up
You can change certain settings by means of the information display. The current
setting is shown on the information display in the respective menu at the top below
⇒ fig.
the line
34.
You can select the following information (depending on the equipment installed on
the vehicle):
MFD Data (MFA DATA)
Convenience
Lights & Vision (Lights & Vision)
Time
Winter tyres
Language
Units
Assistant (Assistant)
Alternative speed displayed (Second speed)
Travel mode
Service Interval (Service)
Factory Setting
Back
Breakdown assistance
29
Fig. 34 Setting the clock
Technical Data