Table of Contents
Advertisement
Carefully remove the cover as follows.
– Guide the fingers into the opening
– By pulling in the direction of arrow
the upper area on the side to the fog lights.
– Afterwards, also slacken the cover on the other side in the direction of
A
arrow
and remove it.
2
– Screw in the towing eye by hand anticlockwise down to the stop
⇒ fig. 232
and tighten up using the wheel wrench* (push the wheel
wrench* through the eye).
– In order to reinstall the cover after screwing out the towing eye, first of
all insert it starting on the side facing the marking. Then press the
cover closed on the side facing the fog light. The cover must engage
firmly.
Using the system
Safety
Fig. 232 Front bumper:
Installing the towing eye
A
⇒ page 254, fig.
231.
A
A
, first of all slacken the cover in
1
Driving Tips
Front towing eye for Octavia RS and Octavia Scout
The towing eye is stored in the box for the vehicle tool kit.
Octavia RS
– Guide one finger into the opening
– Unlock the cover by pulling it in direction
– Screw in the towing eye by hand anticlockwise down to the stop
⇒ fig. 232
and tighten up using the wheel wrench* (push the wheel
wrench* through the eye).
General Maintenance
Breakdown assistance
Breakdown assistance
Fig. 233 Front bumper
Octavia RS: Protective grille
Fig. 234 Front bumper
Octavia Scout: Cover
A
⇒ fig.
of the grille
233.
A
A
and remove it.
1
Technical Data
255
Advertisement
Table of Contents
