Table of Contents
Advertisement
264
Fuses and light bulbs
– Unplug the plug connector and carefully take out the headlight in the
A
direction of arrow
.
2
Installation takes place in the reverse order.
Note
We recommend that you have the headlight setting checked by a specialist garage
after installing the headlight.
Turn signal light at the front
Changing light bulb for turn signal light (at the front)
– Switch the ignition and all lights off.
– Remove the headlight ⇒ page 263.
– Turn the socket in the direction of arrow OPEN (open) and take it out
together with the light bulb for the turn signal light
– Press the defective light bulb into the socket, turn to the left and
remove.
– Press a new light bulb into the socket and turn the light bulb to the
right as far as the stop.
– Insert the socket with the changed light bulb into the headlight and
We recommend that you have the headlight setting checked by a specialist garage
after installing the headlight.
Front parking lights and low beam
Fig. 243 Removing the light
bulb for the turn signal light
Removing the light bulb for the parking light
– Switch the ignition and all lights off.
– Remove the headlight ⇒ page 263.
– Remove the protective cap
– Remove the socket
⇒ fig.
243.
– Take the faulty bulb out of the socket and insert a new one.
– Insert the protective cap.
secure it by turning in the direction of arrow CLOSE (close) to the
right.
Note
A
⇒ page 263, fig.
B
A
⇒ fig.
244.
A
Fig. 244 Removing the bulbs
for the parking and low beam
light
241.
Advertisement
Table of Contents
