Table of Contents
Advertisement
30
Instruments and Indicator/Warning Lights
After selecting the menu point Back you will reach one level higher in the menu.
Displays of the MFA
Here you can switch off or on certain displays of the multi-functional indicator.
Comfort*
You can set the following functions (depending on the equipment installed on the
vehicle):
On vehicles with rain sensor you can switch on or off the
function for automatic closing of the windows and the
Rain closing
sliding/tilting roof in case of rain and locked vehicle. If it
is not raining and the function is set, the windows
including the sliding/tilting roof are closed automatically
after approx. 12 hours.
Door open
Here you can switch on or off the functions for opening
a single door and automatic closing.
Here you can set if a signal tone should sound addition-
ATA confirm
ally when activating or deactivating the anti-theft alarm
system .
Window op.
Here you can set the convenience mode only for the
driver window or for all the windows.
Here you can switch on or off the function for mirror
Mirror down
lowering on the front passenger side when engaging the
reverse gear
Mirror adjust.
Here you can switch on or off the function for left and
right exterior mirror adjustment simultaneously.
After selecting this menu the convenience setting is
reset to factory setting. The following is displayed in the
Factory setting
information display:
Factory setting for convenience is set
a)
This function is only available on vehicles with an electrically adjustable driver seat.
a)
.
Lights and Visibility
Here you can set how long the light should stay on for the function Coming/Leaving
Home and the intensity of the footwell lighting. Furthermore you can here switch
on or off the function daylight driving lights and convenience turn signal.
After selecting the menu point Factory setting the factory setting is established
again.
Time
Here you can set the time, the time format (12 or 24 hour indicator) and the time
change summer/winter time.
Winter tyres
Here you can set at which speed a warning signal should sound. This function is
used for e.g winter tyres with the permissible maximum speed less than the
maximum speed of the vehicle.
When exceeding the speed, the following is displayed on the information display*:
Snow tyres max. speed ... km/h (Winter tyres maximum ... km/h)
Language
Here you can set in which language the warning and information texts should be
displayed.
Measures
Here you can set the units for temperature, consumption and distance driven.
Assistant
Here you can adjust the tones of the acoustic signals of the parking aid*.
Second speed
Here you can switch on the display of the second speed in mph or in km/h
Travel mode
Here you can activate / deactivate the mode "tourist light". This mode makes it
possible to drive in countries with opposing traffic system, driving on the left/right,
3)
Valid for countries where the values are indicated in British measuring units.
3)
.
Advertisement
Table of Contents
