Table of Contents
Advertisement
56
Unlocking and locking
Opening and tilting
Comfort position
– Turn the switch to position
Opening roof fully
– Turn the switch to position
tensioned position).
Tilting roof
– Turn the switch to position
The wind noise in the comfort position is less than when the roof is fully opened.
The sun screen is also opened automatically when the roof slides open. You can
slide the sun screen into the opened or closed position by hand when the
sliding/tilting roof is closed.
Caution
It may be necessary during winter to remove any ice and snow in the area of the
sliding/tilting roof before opening it in order to prevent damaging the opening
mechanism.
Closing
Sliding closed/closing the sliding/tilting roof
– Turn the switch to position
Safety closing
The sliding/tilting roof is equipped with an overload protection system. If an
obstacle (e.g. ice) prevents closing, the sliding/tilting roof stops and opens
completely. You can close the sliding/tilting roof completely without overload
protection by pressing the switch to the
for as long as it takes for the sliding/tilting roof to shut completely ⇒
A
⇒ page 55, fig.
51.
C
A
and hold it in this position (spring-
B
A
.
D
A
⇒ page 55, fig.
51.
A
A
⇒ page 55, fig. 51
position
at the front
A
WARNING
Close the sliding/tilting roof carefully - risk of injury!
Convenience operation
You can also close an open sliding/tilting roof from the outside.
– Hold the key in the locking cylinder of the driver's door in the closing
position or press the closing button of the remote control until the
sliding/tilting roof is closed ⇒
The closing operation stops when one releases the key or the lock button.
WARNING
Close the sliding/tilting roof carefully - risk of injury! The overload protec-
tion system does not function with the convenience closing.
Emergency operation
.
.
Fig. 52 Detail of the head-
liner: Points for positioning
screwdriver
Advertisement
Table of Contents
