Download Print this page
Kleenmaid ICK63 Installation Manual
Kleenmaid ICK63 Installation Manual

Kleenmaid ICK63 Installation Manual

Hide thumbs Also See for ICK63:

Advertisement

Quick Links

Induction Cooktops
Installation Guide
Installation/Ventilation Requirements
When installing an induction hob above an underbench oven, cupboard or drawer unit, the following ventilation requirements
must be observed:
• Heat Shield (heat resistent material, eg. melamine timber veneer) is to be positioned at least 50mm below hob.
• Cooktop must be isolated from underbench area. Heat Shield edges to be sealed to surrounding surfaces
• A Vertical Division (heat resistent material, eg. melamine timber veneer) is to be positioned between the Heat Shield and
the underside of the hob approximately 300mm from back of cupboard. Length of Vertical Division needs to be equal to
width of Heat Shield. Vertical Division must fit tightly and act as a barrier to air flowing back towards the cooling fan in
hob (as per diagram).
• Ventilation holes must be drilled into side of adjoining cupboards to allow fresh air supply to cooktop.
• When installing into a granite worktop, drill holes below worktop (as per diagram).
• The distance between the edge of your appliance and the side and rear walls (or partitions) must be at least four centimetres
(4 cm) as shown in each of the attached specifications.
Insulation kit as shown in owners manual is not required when installation is carried out according to these specifications (this
is not supplied by Kleenmaid).
WARNING:
The induction cooktop cannot be installed above a fridge, dishwasher or washing machine.
Incorrect installation or failure to follow instructions may result in premature failure of cooktop and will void warranty.
*Technical Specifications and product sizes can be varied by Manufacturer without notice. Any cut-outs for appliances should only be by physical measurements. Drawings are not to scale. All
information supplied is for general reference purposes only and is on the understanding that Kleenmaid Pty Ltd will not be liable for any loss, liability or damage whatsoever arising as a result of
reliance of such information.
ICK63_67_87_97.indd 1
For your nearest store call 13 13 08
www.kleenmaid.com.au
ICK63, ICK67X,
ICK87X, ICK97X
3/3/08 1:56:48 PM

Advertisement

loading
Need help?

Need help?

Do you have a question about the ICK63 and is the answer not in the manual?

Questions and answers

Summary of Contents for Kleenmaid ICK63

  • Page 1 *Technical Specifications and product sizes can be varied by Manufacturer without notice. Any cut-outs for appliances should only be by physical measurements. Drawings are not to scale. All information supplied is for general reference purposes only and is on the understanding that Kleenmaid Pty Ltd will not be liable for any loss, liability or damage whatsoever arising as a result of reliance of such information.
  • Page 2 ICK63, ICK67X, ICK87X, ICK97X Induction Cooktops Installation Guide Model ICK63 Specifications Electrical Rating Model Approval No. Amps Voltage ICK63 Q070756 7200 Model ICK67X Specifications Electrical Rating Model Approval No. Amps Voltage ICK67X Q070756 7200 Model ICK87X Specifications Electrical Rating 6.4cm Model Approval No.
  • Page 3 ICK63, ICK67X, ICK87X, ICK97X Induction Cooktops Installation Guide Model ICK97X Specifications Electrical Rating Model Approval No. Amps Voltage ICK97X Q070756 10,800 The cooktop can be wired with 2 separate circuits. 16 amp circuit line 1 32 amp circuit lines 2 & 3 For full details of electrical connection please refer to your Use &...

This manual is also suitable for:

Ick67xIck87xIck97x