Advertisement
Quick Links
Advertisement
Related Manuals for Vivo MOUNT-VW02A
Summary of Contents for Vivo MOUNT-VW02A
- Page 1 VESA Adapter Bracket for 2 Monitor Screens MOUNT-VW02A Assembly Manual...
- Page 2 Better Products for a Better Workspace Experience We are dedicated to creating high-end ergonomic solutions for the office with top of the industry support. Explore Endless Workspace Solutions www.vivo-us.com...
- Page 3 If you do not understand these directions, or if you have any doubts about the safety of the installation, please contact our product support team at 309-278-5303 or help@vivo-us.com for further assistance. Check carefully to make sure there are no missing or defective parts. Failure to report missing parts within 30 days may result in denial of free replacement.
- Page 4 Package Contents A (x2) B (x1) C (x2) VESA Bracket Back Bracket D (x1) E (x2) F (x2) Front Bracket Cable Clip End Cap Included Hardware & Tools S-A (x2) S-B (x4) M-A (x8) M-B (x12) Bolt M6x30mm M4x12mm M5x12mm Screw Screw Screw...
-
Page 5: Assembly Steps
Assembly Steps STEP 1 Attach Arms (C) to Brackets (B,D) using M6x30mm Screws (S-B) and 4mm Allen Wrench (T-A). - Page 6 STEP 2 Slide VESA Brackets (A) onto Arms (C). Attach End caps (F) to Arms and secure using Bolts (S-A). Secure VESA Brackets using 4mm Allen Wrench (T-A).
- Page 7 STEP 3 Attach Cable Clips (E).
- Page 8 STEP 4 - Option 1 - VESA Plate For Wall Mounted: Page 10 Secure assembly to a VESA Plate (not included) using M5x12mm Screws (M-B), Washers (M-C), and Nuts (M-D) with a Phillips screwdriver and 8mm Wrench.
- Page 9 Thread appropriate Screws (M-A, M-B) and Washers (M-C) into the top two holes of each monitor, leaving 3mm of threads exposed. Slide the monitors onto the VESA plates, then secure all holes using the appropriate Screws, Washers, and a Phillips screwdriver. 2 Person Mounting Recommended Proceed to...
- Page 10 - Option 2 - Solid Wood Wall For Concrete/Brick Mounting, go to Page 11 Use Bracket (B) to mark drilling locations on the wall where desired. Use of a level and pencil is recommended. Drill mounting holes at marked locations using the infographic below. Drill Bit: 5/32”...
- Page 11 - Option 3 - Concrete/Brick Wall Use Bracket (B) to mark drilling locations on the wall where desired. Use of a level and pencil is recommended. Drill mounting holes at marked locations using the infographic below. Drill Bit: 5/16” (8mm) Hole Depth: 2.2”...
- Page 12 Thread appropriate Screws (M-A, M-B) and Washers (M-C) into the top two holes of each monitor, leaving 3mm of threads exposed. Slide the monitors onto the VESA plates, then secure all holes using the appropriate Screws, Washers, and a Phillips screwdriver. 2 Person Mounting Recommended...
-
Page 13: Tilt Adjustment
Tilt Adjustment To adjust the tilt, insert the 6mm Allen Wrench (T-B) into the screw on the side of Arm (C). Turn counterclockwise to loosen, set the desired position, then retighten. +/- 45°... -
Page 14: Other Adjustments
Other Adjustments Your mount is now ready for use. Adjust monitor positions as needed. - Page 15 Love Your New Setup? Tag Us on Social! @ VIVO-us @ vivo_us @VIVOus VIVO...
- Page 16 Need Help? We’re Here For You Monday-Friday from 7am-7pm CST Saturday 8am-4pm CST Email Us Chat with Live Agent Give Us a Call help@vivo-us.com www.vivo-us.com 309-278-5303 ext. 1 FOR MORE GREAT VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: WWW.VIVO-US.COM VIVO-us @vivo_us @VIVOus VIVO...
Need help?
Do you have a question about the MOUNT-VW02A and is the answer not in the manual?
Questions and answers