Vivo MOUNT-VW01A Assembly Manual
  1. Manuals
  2. Brands
  3. Vivo Manuals
  4. Racks & Stands
  5. MOUNT-VW01A
  6. Assembly manual
Vivo MOUNT-VW01A Assembly Manual

Vivo MOUNT-VW01A Assembly Manual

Single monitor wall mount
Hide thumbs
1
2
3
4
5
6
7
8

Advertisement

Table of Contents

Single Monitor Wall Mount
MOUNT-VW01A
Assembly Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MOUNT-VW01A and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Vivo MOUNT-VW01A

Summary of Contents for Vivo MOUNT-VW01A

  • Page 1 Single Monitor Wall Mount MOUNT-VW01A Assembly Manual...
  • Page 2 If you do not understand these directions, or if you have any doubts about the safety of the installation, please contact our product support team at 309-278-5303 or help@vivo-us.com for further assistance. Check carefully to make sure there are no missing or defective parts. Failure to report missing parts within 30 days may result in denial of free replacement.

  • Page 3: Package Contents

    Package Contents A (x1) Wall Bracket Included Hardware W-A (x4) W-B (x4) M-B (x4) M-A (x4) M-C (x4) ST4x30mm Drywall M5x12mm M4x12mm Screw M5 Washer Screw Anchor Screw Tools Needed: Phillips Level Pencil Stud Finder Screwdriver Weight Capacity: 17.6lbs (8kg)

  • Page 4: Assembly Steps

    Assembly Steps STEP 1 Loosen the screw on the side of Wall Bracket (A) using a Phillips screwdriver. Remove the VESA Plate (A1).
  • Page 5 STEP 2 Place the Wall Bracket (A) in the desired position and mark the outer holes using a pencil. Use of a level is recommended. Check the locations of each marking and use a stud finder to determine which holes are backed by a stud and which ones are not.
  • Page 6 STEP 3 Attach Wall Bracket (A) to the wall using ST4x30mm Screws (W-A) and a Phillips screwdriver. Slider Ensure the open side of Slider is on top. STEP 4 Attach VESA Plate (A1) to the back of your monitor using the appropriate Screws (M-A or M-B) with M5 Washers (M-C).
  • Page 7 STEP 5 Place VESA Plate (A1) with your monitor into the Slider on Wall Bracket (A) and secure by re-tightening the side screw using a Phillips screwdriver. Slider To raise the monitor, slowly move the monitor up until the latch engages as the desired height.
  • Page 8 Need Help? We’re Here For You Monday-Friday from 7am-7pm CST Saturday 8am-4pm CST Email Us Chat with Live Agent Give Us a Call help@vivo-us.com www.vivo-us.com 309-278-5303 ext. 1 FOR MORE GREAT VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: WWW.VIVO-US.COM VIVO-us @vivo_us @VIVOus VIVO...

Table of Contents