Seneca KEY-C Series User Manual page 18

8. "-C" GATEWAY WEBSERVERS
STEP BY STEP GUIDE FOR THE FIRST ACCESS TO THE WEBSERVER
STEP 1: POWER THE DEVICE AND CONNECT THE ETHERNET PORT, PUT THE DEVICE IN WEBSERVER
MODE
SENECA DISCOVERY DEVICE SOFTWARE STEP 2
If you need to change the IP address of the device (default 192.168.90.101), launch the Seneca Discovery
Device software and perform the SCAN, select the device and press the "Assign IP" button, set a configuration
compatible with your PC, for example:
Confirm with OK. Now the device can be reached via Ethernet from your PC.
STEP 3 ACCESS TO THE CONFIGURATION WEBSERVER
ENTER your access credentials:
user: admin
password: admin
THE WEB BROWSERS WHICH HAVE BEEN TESTED FOR COMPATIBILITY WITH THE DEVICE
THEREFORE, THE OPERATION WITH OTHER BROWSERS IS NOT GUARANTEED
ALL RIGHTS RESERVED. NO PART OF THIS PUBLICATION MAY
BE REPRODUCED WITHOUT PRIOR PERMISSION.
User Manual
ATTENTION!
WEBSERVER ARE:
MOZILLA FIREFOX AND GOOGLE CHROME.
www.seneca.it
MODBUS TO CLOUD
"KEY-C" GATEWAYS
MI00725-1-EN
Page 18