Seneca KEY-C Series User Manual page 13

5. ETHERNET PORT
The factory configuration of the Ethernet port is:
STATIC IP: 192.168.90.101
SUBNET MASK: 255.255.255.0
GATEWAY: 192.168.90.1
Multiple devices must not be inserted on the same network with the same static IP.
DO NOT CONNECT 2 OR MORE FACTORY-CONFIGURED DEVICES ON THE SAME NETWORK, OR THE
6. FIRMWARE UPDATE
In order to improve, add or optimize the functions of the product, Seneca releases firmware updates on the
device section on the www.seneca.it
The firmware update is performed using Seneca tools or the webserver.
NOT TO DAMAGE THE DEVICE DO NOT REMOVE THE POWER SUPPLY DURING THE FIRMWARE
ALL RIGHTS RESERVED. NO PART OF THIS PUBLICATION MAY
BE REPRODUCED WITHOUT PRIOR PERMISSION.
User Manual
ATTENTION!
DEVICE WILL NOT WORK
(CONFLICT OF IP ADDRESSES 192.168.90.101)
website
ATTENTION!
UPDATE OPERATION.
www.seneca.it
MODBUS TO CLOUD
"KEY-C" GATEWAYS
MI00725-1-EN
Page 13