IPOTOOLS TIG 200DI ACDC IGBT DIGITAL Original Instruction Manual page 21

OPERATING CONDITIONS AND WORKING ENVIRONMENT
1. Operating conditions:
•
Voltage, voltage source: AC 220 V/230V/240V,
•
Frequency: 50/60Hz,
•
Reliable grounding.
2. Work environment
•
Relative humidity: not more than 90%,
•
Ambient temperature: -10 ℃ ~ 40 ℃,
•
The welding site must not contain any harmful gas, chemicals, mould and flammable
substances, explosive and corrosive media. The welder must not be subjected to any
vibration or other disturbances,
•
Avoid rain and water, work in such circumstances is prohibited.
BEFORE STARTING WORK
•
Before welding, it is necessary to read and understand the instructions of use,
•
Check the machine for any defects or damage,
•
To ensure the safety of persons and equipment, it is necessary to properly install the
earthing with a 4 mm2 conductor, depending on the requirements of the power supply
system,
•
Welding must take place in a dry and well-ventilated area. Objects in the vicinity must
be at least 0.5 m away from the appliance,
•
Check that all cables are tightly fastened / connected,
•
The appliance must not be moved while the appliance is switched on and welding is
in progress.
•
The appliance must be maintained, used, and operated by a qualified person,
•
Distribution board current: less than 40A.
INSTRUCTION MANUAL
TIG 200DI ACDC Welding machine
7