IPOTOOLS TIG 200DI ACDC IGBT DIGITAL Original Instruction Manual page 19

INSTRUCTION MANUAL
TIG 200DI ACDC Welding machine
DANGERS OF ELECTRIC CURRENT
The device can only be connected to the mains with a shielded connection cable. The fuse
must be of the same power as specified in the technical data of the device. The fuse design
must be slow.
Replace damaged torch parts, cable ground, or damaged mains connector immediately.
Replacement of parts on the network, replacement of the connecting cable can only be
performed by an authorized person. Never hold the burner under your arm or otherwise
wrapped around your body. In the event of prolonged work interruptions, switch off the
appliance and close the shielding gas supply.
In the event of an accident, immediately pull out the plug of the connecting cable!
PURPOSE AND USE
AC DC 200DI is a welding machine with three welding functions. You can use it for DC MMA,
AC TIG and DC / PULSE TIG welding. Any other use may endanger the safety of the welder
or lead to malfunction of the devices! Use of the device contrary to these instructions is not
permitted! Damage to the device that is consequence of use which has not been in accordance
with the instructions is not covered by the warranty statement. With the device you can weld
several materials such as steel, aluminium and aluminium alloys, stainless steel, titanium,
copper, and copper alloys. The welding current is stable and stepless adjustable. The
appliance takes care of a nice weld, so welding takes place quietly and without spraying. The
device is small in size, light and thus easy to transport.
5