SHOWTEC Single Pod for Titan Strobe FLEX FX User Manual

Hide thumbs

Table Of Contents

Quick Links

Download this manual

USER MANUAL

ENGLISH

V1.0

Single Pod for Titan Strobe FLEX FX

Product code: 40307

Table of Contents

Need help?

Do you have a question about the Single Pod for Titan Strobe FLEX FX and is the answer not in the manual?

Questions and answers

Summary of Contents for SHOWTEC Single Pod for Titan Strobe FLEX FX

Page 1 USER MANUAL ENGLISH V1.0 Single Pod for Titan Strobe FLEX FX Product code: 40307...
Page 2 Single Pod for Titan Strobe FLEX FX Preface Thank you for purchasing this Showtec product. The purpose of this user manual is to provide instructions for the correct and safe use of this product. Keep the user manual for future reference as it is an integral part of the product. The user manual shall be stored at an easily accessible location.
Page 3: Table Of Contents
Single Pod for Titan Strobe FLEX FX Table of contents 1. Introduction ............................
Page 4: Introduction
After unpacking, check the contents of the box. If any parts are missing or damaged, contact your Highlite International dealer. Figure 1 Your shipment includes: • • Showtec Single Pod for Titan Strobe FLEX FX with a fixed cable (0,3 m) • • User manual 1.2.
Page 5: Symbols And Signal Words
Single Pod for Titan Strobe FLEX FX 1.6. Symbols and Signal Words Safety notes and warnings are indicated throughout the user manual by safety signs. Always follow the instructions provided in this user manual. Indicates an imminently hazardous situation which, if not avoided, will result in death or DANGER serious injury.
Page 6: Safety
Single Pod for Titan Strobe FLEX FX Safety Important Read and follow the instructions in this user manual before installing, operating or servicing this product. The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual.
Page 7 Single Pod for Titan Strobe FLEX FX WARNING Risk of burns due to hot surface The surface and the inner parts of the device can become very hot during operation. • • Do not touch the device during operation. •...
Page 8: Requirements For The User
Single Pod for Titan Strobe FLEX FX Attention Do not expose the device to conditions that exceed the rated IP class conditions. This device is IP65 rated. IP (Ingress Protection) 65 class means that the device is dust-tight and protected against harmful effect of water jets.
Page 9: Description Of The Device
Description of the Device The Showtec Single Pod for Titan Strobe FLEX FX is a 100 W LED strobe that uses a cold white COB LED. It has a ring of 12 2 W RGBW LEDs that can be controlled individually to create background effects. The aluminum housing is IP65-rated and has a special mounting bracket with 4 holes at a 45-degree angle, so that you do not have to detach the pod from the bracket to drill through the holes to mount it with screws.
Page 10: Product Specifications
Single Pod for Titan Strobe FLEX FX 3.3. Product Specifications Model: Single Pod for Titan Strobe FLEX FX Source: Light source type LED Light source power 100 W LED color type CW / RGBW Optical: Beam angle (circular) 53° Dynamic Effects: Dimmer 0–100 % ...
Page 11: Compatibility
Product compatibility The Showtec Single Pod for Titan Strobe FLEX FX is designed to be operated only with the Showtec Controller for Titan Strobe FLEX FX. The Controller for Titan Strobe FLEX FX is not supplied with the Single Pod for Titan Strobe FLEX FX.
Page 12: Installation
Single Pod for Titan Strobe FLEX FX Installation 4.1. Safety Instructions for Installation WARNING Incorrect installation can cause serious injuries and damage of property. If trussing systems are used, installation must be carried out only by instructed or skilled persons.
Page 13: Rigging
Single Pod for Titan Strobe FLEX FX 4.4. Rigging CAUTION Restrict the access under the work area during rigging/derigging. You can position the pod on a flat surface or mount it to a rigging structure (see 4.4.1. Installation with a Clamp) or to a flat surface (see 4.4.2.
Page 14: 4.4.2. Installation On A Flat Surface
Single Pod for Titan Strobe FLEX FX 4.4.2. Installation on a Flat Surface You can mount the pod on a flat surface in 2 ways: • • With 4 screws, using the 4 mounting holes at 45°, Ø 5 mm (06) •...
Page 15: Setup And Operation
Any other use, not mentioned under intended use, is regarded as non-intended and incorrect use. The Showtec Single Pod for Titan Strobe FLEX FX is designed to be operated only with the Showtec Controller for Titan Strobe FLEX FX (see 3.5.
Page 16: Troubleshooting
Single Pod for Titan Strobe FLEX FX Troubleshooting This troubleshooting guide contains solutions to problems which can be carried out by an ordinary person. The device does not contain user-serviceable parts. Unauthorized modifications to the device will render the warranty void. Such modifications may result in injuries and material damage.
Page 17: Maintenance
Single Pod for Titan Strobe FLEX FX Maintenance 7.1. Safety Instructions for Maintenance DANGER Electric shock caused by dangerous voltage inside Disconnect power supply before servicing or cleaning. 7.2. Preventive Maintenance Attention Before each use, examine the device visually for any defects.
Page 18: Deinstallation, Transportation And Storage
Single Pod for Titan Strobe FLEX FX Deinstallation, Transportation and Storage 8.1. Instructions for Deinstallation WARNING Incorrect deinstallation can cause serious injuries and damage of property. • • Let the device cool down before dismounting. • • Disconnect power supply before deinstallation.
Page 19 Single Pod for Titan Strobe FLEX FX Product code: 40307...
Page 20 Showtec is a brand of Highlite International B.V.

This manual is also suitable for:

40307