Related Manuals for SHOWTEC LED Par 56 Short Eco
Summary of Contents for SHOWTEC LED Par 56 Short Eco
- Page 1 MANUAL ENGLISH LED Par 56 Short Eco Ordercode: 42417 Highlite International B.V. – Vestastraat 2 – 6468 EX – Kerkrade – the Netherlands...
-
Page 2: Table Of Contents
LED Par 56 Short Eco Table of contents Warning ....................................2 Unpacking Instructions ..............................2 LED Expected Lifespan ..............................2 Safety Instructions ................................. 2 Operating Determinations ............................4 Rigging .................................... 4 Connection with the mains............................5 Return Procedure ................................6 Claims .................................... -
Page 3: Warning
Save the carton and all packing materials. In the event that a fixture must be returned to the factory, it is important that the fixture be returned in the original factory box and packing. Your shipment includes: Showtec LED Par 56 Short Eco with 0,6m powercable User manual LED Expected Lifespan LEDs gradually decline in brightness over time. - Page 4 • If your Showtec device fails to work properly, discontinue the use immediately. Pack the unit securely (preferably in the original packing material), and return it to your Showtec dealer for service.
-
Page 5: Operating Determinations
This device can be installed on a flat surface or onto truss systems via the mounting bracket. • The user is responsible for correct positioning and operating of the LED Par 56 Short Eco. The manufacturer will not accept liability for damages caused by the misuse or incorrect installation of this device. -
Page 6: Connection With The Mains
LED Par 56 Short Eco The LED Par 56 Short can be placed on a flat stage floor or mounted to any kind of truss with a clamp. Improper installation can cause serious injuries and/or damage of property! Connection with the mains Connect the device to the mains with the power-plug. -
Page 7: Return Procedure
LED Par 56 Short Eco Return Procedure Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued. Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility. -
Page 8: Description Of The Device
LED Par 56 Short Eco Description of the device Features The LED Par 56 Short Eco is an compact light effect with high output and great effects. Compact size Never change lamps again! Sound Control Low power consumption, long lifetime ... -
Page 9: Frontside
LED Par 56 Short Eco Frontside Fig. 01 01) Adjustment screw 02) Mounting bracket 03) 151 LEDs (51 Red, 49 Green, 51 Blue) Ordercode: 42417... -
Page 10: Backside
LED Par 56 Short Eco Backside Fig. 02 04) 3-pin DMX signal connector IN 05) DMX Dipswitches 06) 3-pin DMX signal connector OUT 07) Ground/Earth connection 08) Audio Sensitivity Ordercode: 42417... -
Page 11: Installation
LED Par 56 Short Eco Installation Remove all packing materials from the LED Par 56 Short. Check if all foam and plastic padding is removed. Connect all cables. Do not supply power before the whole system is set up and connected properly. -
Page 12: One Led Par 56 Short (Manual Mode)
LED Par 56 Short Eco One LED Par 56 Short (Manual Mode) 01) Fasten the effect light to a firm trussing. Leave at least 0,5 meter on all sides for air circulation. 02) Plug the end of the electric mains power cord into a proper electric power supply socket. -
Page 13: Fixture Linking
LED Par 56 Short Eco Multiple LED Pars DMX Set Up Fig. 03 Note : Link all cables before connecting electric power Fixture Linking You will need a serial data link to run light shows of one or more fixtures using a DMX-512 controller. The combined number of channels required by all the fixtures on a serial data link determines the number of fixtures the data link can support. -
Page 14: Dmx Channels
LED Par 56 Short Eco DMX Channels 6 channels Channel 1 – Red 0-255 Gradual adjustment Red, from 0-100% Channel 2 – Green 0-255 Gradual adjustment Green, from 0-100% Channel 3 – Blue 0-255 Gradual adjustment Blue, from 0-100% Channel 4 – Full Color... -
Page 15: Maintenance
Suspect three potential problem areas as: the power supply, the LEDs, the internal fuse. 01) Power supply. Check that the unit is plugged into an appropriate power supply. 02) The LEDs. Return the LED Par to your Showtec dealer. 03) The fuse. Replace the fuse. See page 14 for replacing the fuse. -
Page 16: No Response To Dmx
LED Par 56 Short Eco No Response to DMX Suspect the DMX cable or connectors, a controller malfunction, a light effect DMX card malfunction. 01) Check the DMX setting. Make sure that DMX addresses are correct. 02) Check the DMX cable: Unplug the unit; change the DMX cable; then reconnect to electrical power. -
Page 17: Product Specifications
LED Par 56 Short Eco Product Specifications Model: Showtec LED Par 56 Short Input Voltage: 240V-50Hz (CE) Power consumption: DMX linking: 30pcs Dimensions: 210 x 200 x 260 mm (LxWxH) Weight: 1,56 kg Operating and Programming: Signal pin OUT: Pin 1 (earth), pin 2 (-), pin 3 (+) -
Page 18: Dimensions
LED Par 56 Short Eco Dimensions Ordercode: 42417... -
Page 19: Notes
LED Par 56 Short Eco Notes Ordercode: 42417... - Page 20 ©2015 Showtec...
Need help?
Do you have a question about the LED Par 56 Short Eco and is the answer not in the manual?
Questions and answers