Save the carton and all packing materials. In the event that a fixture must be returned to the factory, it is important that the fixture be returned in the original factory box and packing. Your shipment includes: Showtec LED Police Light IEC power cable (0,8 m) ...
Page 4
• If your Showtec device fails to work properly, discontinue the use immediately. Pack the unit securely (preferably in the original packing material), and return it to your Showtec dealer for service.
LED Police Light Operating Determinations • This device is not designed for permanent operation. Consistent operation breaks will ensure that the device will serve you for a long time without defects. • The minimum distance between light output and the illuminated surface must be bigger than 1 meter.
Page 6
LED Police Light The LED Police Light can be placed on a flat stage floor. Improper installation can cause serious injuries and/or damage of property! Connection with the mains Connect the device to the mains with the power-plug. Always check if the right color cable is connected to the right place. International EU Cable UK Cable...
LED Police Light Return Procedure Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued. Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility. Call Highlite 0031-455667723 or mail aftersales@highlite.nl and request an RMA prior to shipping the fixture.
LED Police Light Description of the device Features The LED Police Light is a light fixture with high output and great effects. Input voltage: 100-240V AC, 50/60Hz Power consumption: 5W Light source: 48 x 5 mm White LEDs ...
LED Police Light Maintenance The operator has to make sure that safety-related and machine-technical installations are to be inspected by an expert after every year in the course of an acceptance test. The operator has to make sure that safety-related and machine-technical installations are to be inspected by a skilled person once a year.
Suspect three potential problem areas as: the power supply, the LEDs, the fuse. 01) Power supply. Check if the unit is plugged into an appropriate power supply. 02) The LEDs. Return the device to your Showtec dealer. 03) The fuse. Replace the fuse. See page 8 for more information.
LED Police Light Product Specifications Model: Showtec LED Police Light Input voltage: 100-240V AC, 50/60Hz Power consumption Fuse: F500mAL/250V Dimensions: ø 155 x 150 mm (WxH) Weight: 0,4 kg Electro-mechanical effects: Light source: 48 x 5 mm White LEDs Operation mode:...
Need help?
Do you have a question about the LED Police Light V1 and is the answer not in the manual?
Questions and answers