Related Manuals for BCP SKY8028
Summary of Contents for BCP SKY8028
- Page 1 INSTRUCTION MANUAL 12V UTV w/Trailer Ride On SKY8028 + SKY8029 + SKY8030 + SKY8031 + SKY8032 + SKY8033 Ver. 1...
- Page 2 As shoppers, we’re always trying to find the perfect balance between quality & value. At BCP, we believe we’ve achieved that. Our diverse catalog of everyday essentials is tailored especially to our customers & guaranteed to hit that sweet spot of high quality & low price.
- Page 3 Charge for 12 hrs before initial use. After initial charge, follow the normal recommended charging time. bestchoiceproducts.com...
-
Page 4: Battery Warnings
SAFETY Please retain these instructions for future reference. This vehicle must be assembled by an adult who has read and understood the instructions in this manual. Keep the packaging and bags away from children and dispose of all packaging before use. Always use common sense and safe practices when operating this vehicle. -
Page 5: Specifications
WARNING To reduce the risk of injury, adult supervision is required. Never use on roadways, near motor vehicles, on or near steep inclines or steps, swimming pools or other bodies of water; always wear shoes, and never allow more than one rider. •... -
Page 6: Tools Required
TOOLS REQUIRED AA - 2 AA BATTERIES (FOR STEERING WHEEL) AAA - 66 LBS 2 PERSON UP TO 45 MIN. PHILLIPS PLASTIC WRENCH 2 AAA BATTERIES CAPACITY ASSEMBLY ASSEMBLY SCREWDRIVER (2, PROVIDED) (FOR REMOTE) HARDWARE SELF TAPPING SCREW 6 PCS PARTS UTV BODY STEERING WHEEL... - Page 7 PARTS BACKREST SEAT WIND DEFLECTOR 1 PC 1 PC 1 PC UPPER BRACKET LOWER BRACKET BRACKET LIGHT SUPPORT 1 PC 1 SET 1 SET TAIL BOX RIGHT MOTOR LEFT MOTOR 1 PC 1 PC 1 PC 12V CHARGER SPRING TRAILER CONNECTOR 1 PC 2 PCS 1 PC...
-
Page 8: Product Assembly
PARTS TRAILER BED TRAILER AXLE TRAILER WHEEL 1 PC 1 PC 2 PCS TRAILER WHEEL REMOTE CONTROL TRAILER BRACKET COVER BUCKLE 2 PCS 1 PC 1 PC PRODUCT ASSEMBLY Place the part A UTV body top side down on a Locate the part F front axle and flat, covered surface to prevent scratches, then remove the preassembled nuts from... - Page 9 PRODUCT ASSEMBLY Locate two part Q springs and place them on the connective tines of the part F front axle. Loop the steering shaft through the central hole on the axle, then secure the shaft with the previously removed nut and washer (see step 1). Secure the part F front axle to the square pipe on the part A UTV body with the previously removed nuts (see step 2).
- Page 10 PRODUCT ASSEMBLY Locate the part E rear axle and remove the pre-assembled hardware. Slide the rear axle through the opening at the back of the part A UTV body. Slide the part N & O motors into their respective place on the part E rear axle. Insert the power connector on each motor to the terminal before pressing the motors into place.
- Page 11 PRODUCT ASSEMBLY Attach two part C wheels to the part B front axle, then secure with the previously removed hardware. Cover each wheel with one part D wheel cover. C [8] Attach two part C wheels to the part E rear axle, then secure with the previously removed hardware.
- Page 12 PRODUCT ASSEMBLY Flip the UTV assembly upright. Place the part M tail box onto the connective tines at the rear of the part A UTV body, then secure with two part 1 screws. Locate and remove the bolt on the side of the part B steering wheel’s shaft. Place the part B steering wheel over the steering yoke, then replace the bolt to secure.
- Page 13 PRODUCT ASSEMBLY Use a Philips screwdriver to open the battery access on the part B steering wheel, then install two AA batteries. Replace the battery cover and secure the screw. Attach the part G backrest to the part M tailbox by inserting the tabs on the backrest into the slots in the tailbox.
- Page 14 PRODUCT ASSEMBLY Locate the two motor connectors (3) and join them to the control board connector (4). Then, join the two red connectors (1 & 2) to link the battery and power the ride-on. Insert the part H seat into the part G backrest, then secure with two part 1 screws.
- Page 15 PRODUCT ASSEMBLY Insert the part I wind deflector to the front of the part A UTV body, push until secured. Attach the part K lower bracket supports to the part J upper bracket. Attach the part L bracket lights to the part J upper bracket. Attach the bracket assembly to the part A UTV body, push until secured.
- Page 16 PRODUCT ASSEMBLY Locate the part R trailer connector and attach it to the rear of the part A UTV body. Align the four connectors on the part S trailer bed with the receivers on the part X trailer bracket, then press firmly until you hear a click to secure. Locate the part T trailer axle and remove the preassembled hardware, then set aside.
- Page 17 PRODUCT ASSEMBLY Attach two part U axle wheels to the part T trailer axle, then secure with the previously removed hardware. Cover each wheel with one part V trailer wheel cover. ③ ③ Attach the assembled trailer to the UTV body by pressing the button on the trailer to the bolt on the part R trailer connector until secured.
-
Page 18: Remote Control
REMOTE CONTROL INDICATOR LIGHTS SPEED SELECT FORWARD PARK / STOP TURN RIGHT TURN LEFT REVERSE Remote control operation will OVERIDE manual operation; the pedal will not work when operating • the remote control. • After a period of non-operation, the remote will go into power-saving mode. Linking the remote control: 1. -
Page 19: Control Board Diagram
CONTROL BOARD DIAGRAM 11 12 13 14 TUNE START STOP High MODE Tune: FM radio search, press to find FM radio channels. FM: Press to enter FM Radio Mode. Mode: Press to toggle between start sound, the media player, Bluetooth, and the aux input. Forward: Press to make the car move forward when the foot pedal is pressed. -
Page 20: Charging Instructions
CHARGING INSTRUCTIONS Charging port is located on the control board. Plug the part P charger into the charging port on the control board, then plug the other end into the wall. Charge the battery 12 hours before initial use. When fully charged, unplug part P charger from the wall outlet, then remove the charger from the charging port. -
Page 21: Charging Notice
CHARGING NOTICE • On average, you will need to charge the battery between 8 and 12 hours. Do not charge the battery for more than 20 hours. Failure to charge the battery as directed could cause permanent damage to the battery and void the warranty. -
Page 22: Troubleshooting
TROUBLESHOOTING PROBLEM REASON SOLUTION Low battery Fully charge the battery Stop use for several minutes and restart Electrical protection Vehicle does not move Completely press in switches Switch not in the correct position Battery connectors disconnected Plug in battery connectors Battery connectors disconnected Plug in battery connectors Battery does not recharge... -
Page 23: Fcc Compliance Statement
FCC COMPLIANCE STATEMENT This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This product may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. -
Page 24: Help Center
HELP CENTER Question about your product? We're here to help. Visit us at: help.bestchoiceproducts.com CHAT Chat Support Product Inquiry Orders FAQ Product Assembly Returns & Refunds PRODUCT WARRANTY INFORMATION All items can be returned for any reason within 60 days of the receipt and will receive a full refund as long as the item is returned in its original product packaging and all accessories from its original shipment are included.
Need help?
Do you have a question about the SKY8028 and is the answer not in the manual?
Questions and answers