Cordivari VNT2000 Design Run Use And Maintenance Manual page 11

English
5. Connect to the app in WiFi default mode (Method 2) following the
steps below
5.1 Reset the unit and press
flashes slowly: the unit is trying to synchronise.
5.2 Enter the app and click on "+" or ADD DEVICE.
5.3 Select the OTHERS folder and click on CONNECTOR (WIFI).
5.4 Close the pop-up window that appears by clicking on the "X".
5.5 Enter your WiFi network credentials and click on NEXT.
5.6 Click on CONFIRM THE INDICATOR IS BLINKING and then on
BLINK SLOWLY.
5.7 The app will show that the unit has been added successfully. Click
on DONE to end the procedure.
+ for a long time. The WiFi icon
After the unit has been added, the name can be changed.
The unit's management interface appears as in the figure below.
For further advanced features, please refer to the user guides related to
the Smart Life app and available on the web.
12 . Maintenance
Modifying the structure, hydraulic layout or wiring of the appliance is
prohibited. All maintenance work can only be carried out by trained and
qualified personnel. The error codes shown in this manual can help
identifying the nature of any anomalies or malfunctions.
12.1 Cleaning the dust filter
To ensure the correct air flow entering the unit, the dust filter must
be cleaned monthly or more frequently if necessary (for example, in
particularly dusty environments). Make sure that the product is electrically
disconnected before proceeding as follows:
1. Remove the anti-tip screws at the base of the unit and tilt the metal
casing slightly outwards.
- 24 -
Cod. 1910000000085 - nv02