Palm 700wx - Treo Smartphone 60 MB User Manual page 221

WPA: Indicates that the network is a
•
WPA network that uses 802.1x
protocols.
WPA-PSK: Indicates that the network
•
is a WPA network that requires a
preshared key. A preshared key is a
password that is used by all users on
the network. In other words, all users
have the same password.
Data Encryption: Sets the encryption
method. The options in this list vary
based on your Authentication setting.
Disabled: Turns data encryption off.
•
WEP: Turns on the wired equivalent
•
privacy encryption method.
TKIP: Turns on the temporal key
•
integrity protocol encryption method.
This method is often used to encrypt
WPA and WPA-PSK connections.
The key is automatically provided:
Indicates whether you need to specify
the Network key and Key index provided
by your system administrator, or
whether the network provides this
information. The availability of these
options varies based on your
Y O U R P E R S O N A L S E T T I N G S
Authentication and Data Encryption
settings.
8 Select the 802.1x tab, and then set the
following, if available (the settings vary
based on your settings on the other
tabs and on the supported features of
your Wi-Fi SDIO card):
Use IEEE 802.1x network access
controls: Lets you set these
parameters if required by the network.
EAP type: Specifies the extensible
authentication protocol type.
9 Press OK .
Selecting a Wi-Fi network
After you set up a Wi-Fi connection, it's
easy to connect to that network. If you
C O N N E C T I O N S E T T I N G S
10
213