Palm 700wx - Treo Smartphone 60 MB User Manual page 123

3 Point the IR port on your smartphone
directly at the IR port of the receiving
device.
4 When the name of the receiving device
appears, select it to begin the transfer.
A blue icon indicates a Bluetooth
connection, and a red icon indicates an
IR connection.
5 Wait for "Done" to appear next to the
name of the receiving device before you
continue using your smartphone.
Receiving beamed information
1 Turn on your screen.
2 Point your smartphone's IR port directly
at the IR port of the transmitting device.
Y O U R E M A I L A N D O T H E R W I R E L E S S S E R V I C E S
3 When the Receiving Data message
appears, select Yes to receive the
beam.
If you can't receive beamed info, press
TIP
Start and select Settings. Select the
Connections tab, and then select Beam.
Make sure the Receive all incoming beams
box is checked. If you still can't receive info,
try a soft reset (see Resetting your
smartphone).
Synchronizing over an infrared
connection
1 Set up your computer to receive
infrared beams. See ActiveSync Help on
your computer for details.
2 Point your smartphone's IR port directly
at the IR port on your computer.
3 On your smartphone, press Start
and select Programs.
4 Select ActiveSync
5 Press Menu
select Connect via IR.
6 Select Sync.
B E A M I N G I N F O R M A T I O N W I T H I R
.
(right action key) and
5
115