Table of Contents
Advertisement
Nokia Switch
Transfer content
You can use the
Switch
as phone numbers, addresses, calendar items, and
images from your previous Nokia device to your new
device using Bluetooth connectivity.
The type of content that can be transferred depends on
the model of the device from which you want to transfer
content. If that device supports synchronisation, you can
also synchronise data between the devices. Your device
notifies you if the other device is not compatible.
If the other device cannot be switched on without a SIM
card, you can insert your SIM card in it. When your device
is switched on without a SIM card, the offline profile is
automatically activated.
Transfer content for the first time
1.
To retrieve data from the other device for the first
time, on your device, select
application, or press
Utilities
> Switch.
2.
Select the connection type you want to use to transfer
the data. Both devices must support the selected
connection type.
3.
If you select Bluetooth, connect the two devices. To
have your device search for devices with Bluetooth
© 2008 Nokia. All rights reserved.
application to copy content such
Switch
in the Welcome
, and select
Tools
>
connectivity, select Continue. Select the device from
which you want to transfer content. You are asked to
enter a code on your device. Enter a code (1-16-digits),
and select OK. Enter the same code on the other
device, and select OK. The devices are now paired.
"Pair devices", p. 102.
Some earlier Nokia devices do not already have the
Switch application. In this case the Switch application
is sent to the other device as a message. To install the
Switch application on the other device, open the
message, and follow the instructions on the display.
4.
From your device, select the content you want to
transfer from the other device.
When the transfer has started, you can cancel it and
continue later.
Content is transferred from the memory of the other
device to the corresponding location in your device. The
transfer time depends on the amount of data to be
transferred.
Synchronise, retrieve, or send
content
After the first transfer, select from the following to start
a new transfer, depending on the model of the other
device:
See
23
Advertisement
Chapters
Table of Contents
